Cart 2 india

Specification
AgeRangeDescription : adult
Brand : sujeniir
BulletPoint1 : Calomel electrode instructions:
BulletPoint10 : electrode potential of calomel electrode has large negative temperature
BulletPoint2 : 1.calomel electrode in use, should first unplug the side and end of the
BulletPoint3 : rubber cap, so that the salt bridge solution by gravity flow and the
BulletPoint4 : dimension of the solution was measured by the formation of.
BulletPoint5 : 2. electrode potassium chloride solution can not have bubbles, solution should be retained a little potassium chloride crystal.
BulletPoint6 : 3.when measuring the calomel electrode surface salt solution should be
BulletPoint7 : slightly higher than the measured solution, the solution was measured to
BulletPoint8 : prevent back diffusion of calomel electrode.
BulletPoint9 : 4. because the
Color : Chi151
ExternallyAssignedProductIdentifier : 4083928404682
ItemName : sujeniir Saturated Calomel SCE Reference Electrode, Mercury/mercurous sulfate Electrode.(CHI151)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-electrochemistry-accessories
Manufacturer : sujeniir
ModelName : sujeniir23905
ModelNumber : sujeniir23905
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : sujeniir23905
ProductDescription : Product Description:
saturated calomel electrode as reference electrode
electrochemical reference electrode and calomel electrode
Model
describe
Number
Price
Saturated calomel electrode
mercury/Mercury sulfate reference electrode
Calomel electrode instructions:
1.calomel electrode in use, should first unplug the side and end of the
rubber cap, so that the salt bridge solution by gravity flow and the
dimension of the solution was measured by the formation of.
2. electrode potassium chloride solution can not have bubbles, solution should be retained a little potassium chloride crystal.
3.when measuring the calomel electrode surface salt solution should be
slightly higher than the measured solution, the solution was measured to
prevent back diffusion of calomel electrode.
4. because the
electrode potential of calomel electrode has large negative temperature
coefficient and thermal lag, so the measurement should be to prevent the
temperature fluctuation. Accurate measurements should be made at
constant temperature.
5. found the measured solution contamination on the calomel electrode liquid network part, be ready to scrape the dirt.
The use of 6. calomel electrode is generally not more than 70 DEG C environment.
7. when the electrode surface is accompanied by potassium chloride solution and crystal, it should be removed at any time.
8. because the calomel electrode potential changes caused by photolysis, use and storage should be taken to avoid light.
9.coat with double saltbridge saturated calomel electrode (type 217), if
the outer tube can be removed when the general use of saturated calomel
electrode. When determining samples susceptible to K or Cl_
interference, additional appropriate solutions should be filled in the
outer sleeve. For example: when using potassium electrode to measure K,
charge 0.1MLiAc; use chlorine electrode to m
ProductSiteLaunchDate : 2024-10-17T04:46:44.563Z
Size : One Size
UnitCount : 1
UnspscCode : 39121529