Cart 2 india

Specification
Brand : Selecto Scientific
BulletPoint : - Glass fiber reinforced PEEK mold body - Carbon steel plungers and cell clamps - 1-year limited warranty
BulletPoint1 : Product introduction: This carbon felt adds specific surface area treatment to ordinary carbon felt, making the fiber surface rough. This carbon felt has excellent hydrophilicity. Due to the surface area treatment, the contact resistance between fibers increases, resulting in a higher resistance than ordinary carbon felt.
BulletPoint10 : 8. Packaging: Double sided PE protection, shockproof and moisture-proof packaging.
BulletPoint2 : Thickness 1mm/2mm/4mm
BulletPoint3 : Carbon content ≥ 90%
BulletPoint4 : Specific surface area ≥ 1500 m2/g
BulletPoint5 : 3. Square resistance: 50 ohms,35 ohms, 15 ohms, 10 ohms (single sided conductivity);
BulletPoint6 : 4. Optics: Transmittance: ≥ 80% haze:<2% UV absorption: ≥ 85% infrared reflectance: ≥ 85% microwave attenuation: ≥ 85%.
BulletPoint7 : 5. Physical properties: adhesion: 100/100, curl: ≤ 10 mm.
BulletPoint8 : 6. Temperature characteristics: High temperature: 120 ℃, 120hr ≤ 1.3 Low temperature: -40 ℃, 120hr ≤ 1.3 Thermal cycle: -30 ℃ -80 ℃ ≤ 1.3.
BulletPoint9 : 7. Application: Suitable for the preparation and production of flexible electrochromic devices, as surface heating agents, heating anti frost films, flexible thin film solar cells, and flexible EL light-emitting devices.
ExternallyAssignedProductIdentifier : 8712962390809
ExternallyAssignedProductIdentifier1 : 8012823268378
ExternallyAssignedProductIdentifier2 : 08012823268378
IncludedComponents : 1 PCS Carbon felt with high specific surface area for electrodes
ItemDisplayWeight : 1.5 pounds
ItemName : Selecto Scientific 101-260 10 Scaleout Cartridge
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-electrochemistry-accessories
Manufacturer : Selecto Scientific
Material : Thickness: 1mm
ModelName : Narooteipg1r9da30
ModelNumber : 101-260
NumberOfItems : 1
PartNumber : 101-260
Pattern : Solid
ProductDescription : CARTRIDGE SCALEOUT 10
ProductDescription1 : ◕2 Isometric Interconnected Volume H-type Sealed Electrolytic Cell, PTFE Lid
ProductDescription2 : ◕Product Features: The middle of the two pools is isolated by an ionic membrane, which can be quickly replaced
ProductDescription3 : ◕Use: Used in electrochemical experiments where cathode and anode electrolytes are different or should not be mixed, the middle needs to be isolated with a diaphragm (such as Nafion membrane, etc.) to avoid mutual interference
ProductSiteLaunchDate : 2015-02-08T21:13:26.030Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Wattage : 10 watts