Specification Brand : FUTTFUTTFU BulletPoint1 : Name: Type II MEC Reactor Microbial Chemical Fuel Cell Case BulletPoint2 : Colour: transparent, Brown BulletPoint3 : Microbial Fuel Cell: Glass explosion-proof reagent bottle made of standard borosilicate 3.3 glass, transparent, colorless and transparent brown. Low coefficient of thermal expansion (20 - 300 ℃), resistant to chemical erosion, with very high water resistance, acid resistance, alkali resistance, salt solution, organic matter and halogen characteristics. BulletPoint4 : High temperature resistance (can be sterilized by high pressure heating of 140 ℃ steam), high heat shock resistance (rapid change temperature 280 ℃), uniform wall thickness, the thinnest part is not less than 2.2 mm. Capacity : 250 milliliters CareInstructions : Dishwasher Safe Color : reference image color ExternallyAssignedProductIdentifier1 : 0714855280264 ExternallyAssignedProductIdentifier2 : 714855280264 IncludedComponents : Microbial fuel cell reactor IsOvenSafe : 1 ItemName : MFC Microbial Reactor electrolytic Cell clamp Type II bioglass Reactor Water Electrolysis Fuel Cell Hydrogen Fuel Cell Reactor (250ml) ItemPackageDimensions_Height : 0.2 centimeters ItemPackageDimensions_Length : 10.5 centimeters ItemPackageDimensions_Width : 5 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : science-lab-electrochemistry-accessories Manufacturer : FUTTFUTTFU Material : Glass ModelName : Microbial fuel cell reactor ModelNumber : 3023- NumberOfItems : 1 PartNumber : MFC microbial reactor ProductDescription : Introduction of accessories:
1. There is a new designed special fixed flange support at the link between the bottle and the bottle to prevent the bottle from tilting and to add a high-quality corrosion-resistant special O-ring inside.
2. Linkages are fixed with new design hoops. Ensure safe sealing.
3. GL45 caps are equipped with solid caps or hollow caps. The cover material can be divided into PP or PBT. PP, 140 degree PBT and 180 degree PBT.
4. Side interfaces are marked with standard threaded nozzle adapters.
5. The nozzle joint is made of 180 degree PBT material.
6. The hoop material is high strength and hard material production. Ensure the seal is stable and reliable, and can be sterilized at 121 degrees high temperature and pressure.
7. The latest design uses the distance between the ultra-short flange and the reaction chamber. The reaction data and the direct are more accurate. 2. The nozzle is designed with cyclone circulation flow.
The product is customized, so we will start production immediately after placing the order. It will take about three days to complete the production. ProductSiteLaunchDate : 2023-12-10T08:00:00.000Z Size : 250ml SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1