Cart 2 india

Specification
Brand : FUTTFUTTFU
BulletPoint1 : Name: Type II MEC Reactor Microbial Chemical Fuel Cell Case
BulletPoint2 : Colour: transparent, Brown
BulletPoint3 : Microbial Fuel Cell: Glass explosion-proof reagent bottle made of standard borosilicate 3.3 glass, transparent, colorless and transparent brown. Low coefficient of thermal expansion (20 - 300 ℃), resistant to chemical erosion, with very high water resistance, acid resistance, alkali resistance, salt solution, organic matter and halogen characteristics.
BulletPoint4 : High temperature resistance (can be sterilized by high pressure heating of 140 ℃ steam), high heat shock resistance (rapid change temperature 280 ℃), uniform wall thickness, the thinnest part is not less than 2.2 mm.
BulletPoint5 : [Lightweight Design] With a on portability, this graphite rope is easy to handle and transport.
Capacity : 250 milliliters
Color : #114
ExternallyAssignedProductIdentifier : 1044165549584
ExternallyAssignedProductIdentifier1 : 0797999600990
ExternallyAssignedProductIdentifier2 : 797999600990
IncludedComponents : Microbial fuel cell reactor
ItemName : MFC Microbial Reactor electrolytic Cell clamp Type II bioglass Reactor Water Electrolysis Fuel Cell Hydrogen Fuel Cell Reactor (100ml)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemShape : Square Bar
ItemTypeKeyword : science-lab-electrochemistry-accessories
Manufacturer : FUTTFUTTFU
Material : Glass
ModelNumber : 100ml
NumberOfItems : 1
PartNumber : MFC microbial reactor
ProductDescription : Introduction of accessories:

1. There is a new designed special fixed flange support at the link between the bottle and the bottle to prevent the bottle from tilting and to add a high-quality corrosion-resistant special O-ring inside.

2. Linkages are fixed with new design hoops. Ensure safe sealing.

3. GL45 caps are equipped with solid caps or hollow caps. The cover material can be divided into PP or PBT. PP, 140 degree PBT and 180 degree PBT.

4. Side interfaces are marked with standard threaded nozzle adapters.

5. The nozzle joint is made of 180 degree PBT material.

6. The hoop material is high strength and hard material production. Ensure the seal is stable and reliable, and can be sterilized at 121 degrees high temperature and pressure.

7. The latest design uses the distance between the ultra-short flange and the reaction chamber. The reaction data and the direct are more accurate. 2. The nozzle is designed with cyclone circulation flow.

The product is customized, so we will start production immediately after placing the order. It will take about three days to complete the production.
ProductSiteLaunchDate : 2024-06-01T07:00:00.000Z
Size : 5mm/0.2in
SupplierDeclaredDgHzRegulation : not_applicable