Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Amber
BulletPoint2 : Cure Type: Heat cure or Room Temperature
BulletPoint3 : Benefits: Low viscosity easily mixed effective electrical insulator low permeability to gasses and vapors
BulletPoint4 : Mix Ratio by weight: 100:100 / Resin: Hardener
BulletPoint5 : Typical Applications: FDA Grade Applications, food packaging, indirect contact with food and medical applications
Color : Amber
CompatibleMaterial : Packaging
CompatibleMaterial1 : Wood
CompatibleMaterial2 : Ceramic
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Plastic
ExternallyAssignedProductIdentifier : 4913263162254
ExternallyAssignedProductIdentifier1 : 779008833070
ExternallyAssignedProductIdentifier2 : 0779008833070
ExternallyAssignedProductIdentifier3 : 00779008833070
FcShelfLife : 1095 days
Hazmat1 : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S., ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S., ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S., contains silver and bisphenol F glycidyl ether/ formaldehyde copolymer
Hazmat10 : CN_Unregulated
Hazmat11 : DE_Unregulated
Hazmat12 : EG_Unregulated
Hazmat13 : ES_Unregulated
Hazmat14 : FR_Unregulated
Hazmat15 : GB_Unregulated
Hazmat16 : IN_Unregulated
Hazmat17 : IT_Unregulated
Hazmat18 : JP_Unregulated
Hazmat19 : MX_Unregulated
Hazmat2 : UN3077
Hazmat20 : NL_Unregulated
Hazmat21 : PL_Unregulated
Hazmat22 : SA_Unregulated
Hazmat23 : SE_Unregulated
Hazmat24 : SG_Unregulated
Hazmat25 : TR_Unregulated
Hazmat26 : US_Unregulated
Hazmat27 : ZA_Unregulated
Hazmat3 : III
Hazmat4 : 9
Hazmat5 : AE_Unregulated
Hazmat6 : AU_Unregulated
Hazmat7 : BE_Unregulated
Hazmat8 : BR_Unregulated
Hazmat9 : CA_Unregulated
IncludedComponents : 1 Part A and 1 part B
IsExpirationDatedProduct : 1
ItemDisplayDimensions_Height : 4 millimeters
ItemDisplayDimensions_Length : 4 millimeters
ItemDisplayDimensions_Width : 12 millimeters
ItemDisplayWeight : 0.5 kilograms
ItemForm : Liquid
ItemName : FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application
ItemPackageDimensions_Height : 15.5 centimeters
ItemPackageDimensions_Length : 3.2 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
ItemVolume : 3 milliliters
LiquidVolume : 6 milliliters
Manufacturer : Epoxy International
Material : Silver Epoxy
Material1 : Epoxy Resin
Material2 : Resin
ModelNumber : 8330S-21G
NumberOfItems : 1
PackageLevel : unit
PartNumber : FDA-Bond 8-
ProductDescription : Mix Ratio by weight: 100:100 / Resin: Hardener Typical Applications: FDA Grade Applications, food packaging, indirect contact with food and medical applications Viscosity @ 25 C, cps: 1,500 (After Mixing)@ temperature 77.0 F, 25.0 C Thixotropic Index: 1.0 Specific Gravity, mixed: 1.11 Reactive solids contents, %: 100 Pot Life: 45 minutes 4 Hours: @ 65C 24 Hours: @ 25C Hardness, Shore D: 65 Dielectric strength volts/mil: 410 Volume Resistivity: 1.00e+14 ohm-cm Dielectric Constant: 3.35 @ frequency 1000 Hz Operating Temperature: -70 to 145 C CTE, linear: 29.4 in/in-F @ temperature 68.0 F FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application EPOXY ADHESIVE is a low viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply FDA-Bond 8 Medical Grade Epoxy Adhesive, Two Part Easy Mix Application completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.This epoxy can be supplied in various different packages.
ProductSiteLaunchDate : 2016-03-28T14:23:01.759Z
SafetyDataSheetUrl : https://www.mgchemicals.com/downloads/kits/01%20English%20Can-USA/sds-8330s-kit.pdf
Size : 21 g
SpecificUsesForProduct : Woodworking, Repair
SpecificUsesForProduct1 : Denture
SpecificUsesForProduct2 : Surgical
SpecificUsesForProduct3 : Automotive
SpecificUsesForProduct4 : Aerospace
SpecificUsesForProduct5 : Marine
Style : nastro di rame, resina epossidica conduttiva, adesivo conduttivo, resina epossidica 1 parte, colla epossidica, connettore del filo, saldatura a freddo, colla conduttiva, adesivo per componenti, colla per cavi, adesivo elettronico, adesivo elettrico, riparazione antiappannante posteriore,
SupplierDeclaredDgHzRegulation : ghs
SurfaceRecommendation : Glass
TensileStrength : 1290 pounds_per_square_inch
UnitCount : 1
WaterResistanceLevel : waterproof