Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Amber
BulletPoint2 : Cure Type: Room temperature or Heat Cure
BulletPoint3 : Benefits: Room temperature or Heat Cure Tough enamel like cure Bonds to a variety of substrates Weather resistant
BulletPoint4 : Mix Ratio by weight: 100:100 / Resin:Hardener
BulletPoint5 : Substrates: Metals, glass, Crystals, wood and many plastics
Color : Amber
CompatibleMaterial : Wood,glass,packaging,plastics
ExternallyAssignedProductIdentifier : 5060613510063
IncludedComponents : Soft Tape Measure
ItemForm : Liquid
ItemName : Crystal-Bond 24 Epoxy Adhesive Strongest Bonding Agent 24 Hour Adhesion
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
ItemVolume : 24 fluid_ounces
Manufacturer : Epoxy International
Material : Resin
ModelNumber : YCFT-0003
NumberOfItems : 1
PartNumber : Crystal-Bond 24-
ProductDescription : Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: Metals, glass, Crystals, wood and many plastics Operating Temperature: -60 to 163 C Typical Application(s): Staking components, bonding, laminating and repair applications Specific Gravity, mixed: 1.07 Reactive solids contents, %: 100 Pot Life: 60 minutes 4 to 6 hours: @ 65C 24 hours: @ 25C Shelf Life: 2 years closed packaging Glass Transition Temp, Tg: 93C Hardness, Shore D: 78 Lap shear: 2900 psi (Alum to Alum) Crystal-Bond is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength.Crystal-Bond contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Crystal-Bond completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.This epoxy can be supplied in various different packages.
ProductSiteLaunchDate : 2016-03-28T14:22:42.878Z
Size : 15x10x5mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Paper
SurfaceRecommendation2 : Glass
TensileStrength : 16 kips_per_square_inch
UnitCount : 150
WaterResistanceLevel : water_resistant