SpecificationBrand : Hercules
BulletPoint1 : Use on pipes carrying acids, solvents, alkalis, steam, hot and cold water, lp gas, natural gas, oxygen and almost every chemical
BulletPoint2 : Clean break off and no shedding
BulletPoint3 : Thick tape requires few wraps
BulletPoint4 : Excellent dielectric properties minimize galvanic action
BulletPoint5 : Carrier/Backing: soft polyvinyl chloride (SPVC) film. Adhesive: rubber. Thickness: 6.8 mils (carrier, adhesive). Adhesion: 17 ounces per inch (to stainless steel test panel). Tensile Strength: 16 pounds per inch (longitudinal). Service/Operating Temperature: up to 194F. Elongation: 100%. Core: 3-inch diameter.
BulletPoint6 : For industrial/occupational use only. Not for consumer sale or use
Color : White
CompatibleMaterial : Industrial,metal,plastic,plastics,rubber,stainless Steel,vinyl
CompatibleMaterial1 : Acrylates copolymer
CompatibleMaterial2 : Polyvinyl Chloride
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 032628151246
ExternallyAssignedProductIdentifier2 : 0032628151246
ExternallyAssignedProductIdentifier3 : 00032628151246
IncludedComponents : Electrical PVC Tape
ItemDisplayDimensions_Height : 0.98 inches
ItemDisplayDimensions_Length : 4.75 inches
ItemDisplayDimensions_Width : 4.75 inches
ItemDisplayWeight : 0.59 pounds
ItemName : Tape Dope
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : electrical-tape
Language : english
LowerTemperatureRating : 32 degrees_fahrenheit
Manufacturer : Hercules
Material : Resin
Material1 : Acrylic
Material2 : Polyester
ModelNumber : 15124
NumberOfItems : 1
PackageLevel : unit
PartNumber : 15124
ProductDescription :
JVCC VEPT-65 Vinyl Electroplating Tape is a soft polyvinyl chloride (SPVC) film masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process. In addition, VEPT-65 can be used as a protection tape for shot peening applications.
JVCC VEPT-65 Vinyl Electroplating tape is extremely conformable and durable for even the most difficult shapes and applications. VEPT-65 is highly resistant to oil, acids, alkalines and corrosive chemicals making this tape an ideal choice for challenging industrial applications. JVCC VEPT-65 Vinyl Electroplating Tape has excellent adhesion to metals and plastics.
If not otherwise specified widths shown in dropdown are in inches. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
ProductSiteLaunchDate : 2014-02-14T14:30:12.237Z
RecommendedUsesForProduct : Plumbing
Size : 1 in. x 36 yds. (25mm wide)
StreetDate : 2017-09-22T00:00:01Z
Style : 10-Roll
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Plastic
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
UnitCount : 1
UnspscCode : 31201500
UpperTemperatureRating : 221 degrees_fahrenheit
WaterResistanceLevel : water_resistant