Cart 2 india

Specification
Brand : eletechsup
BulletPoint1 : How to use: After power on (the output may be turned off or on), click the button to turn on or off the output (the status remains unchanged until the button is clicked again)
BulletPoint2 : Working voltage: DC 8-25V(Recommend DC 12V)
BulletPoint3 : MODBUS RTU protocol, 03 read command, 06 write command.
BulletPoint4 : .Enclosed brake stays clean and dry for positive load positioning. The three-position selector lever makes the hoist easy to operate and the steel chain guide rolls for a smoother feed.
BulletPoint5 : .The handle has non-slip rubber material cover with special texture, which is ergonomic and increases the comfort and safety of the operator.
Color : 5 PCS B version 20-220C
ExternallyAssignedProductIdentifier : 7505583813090
ExternallyAssignedProductIdentifier1 : 0759187321209
ExternallyAssignedProductIdentifier2 : 759187321209
IncludedComponents : PTA9B01
ItemName : DC 12V PT100 RTD Converter RS485 Modbus Rtu Temperature Sensor (5 PCS B version 20-220C)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electric-winches
Manufacturer : eletechsup
ModelName : PTA9B01
ModelNumber : PTA9B01
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ND2812TB
ProductDescription :

Product Name: DC 12V PT100 RTD Converter RS485 Modbus Rtu Temperature Sensor

 

 Packing list (Please select the product you need):

1 PCS / 5 PCS PTA9B01 PT100 RS485 Acquisition module

1 PCS / 5 PCS PT100 sensor

1 PCS / 5 PCS Matching shell

 

Description :

PTA9B01 PT100 RS485 Acquisition module Description:

Working voltage: DC 8-25V(Recommend DC 12V)

Working current: 8-13MA

MODBUS RTU protocol, 03 read command, 06 write command.

Serial port baud rate: 9600 (default), N, 8, 1

By modifying the 485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater)

Can read temperature and PT100 resistance value

Adapted sensor: PT100 3-wire or 2-wire sensor

Temperature measurement range:

A version -20℃ to +400℃

B version -20℃ to +220℃

. It is recommended to select a version with a smaller range within the range that meets the measurement.

Temperature measurement accuracy: 1%.

Size: 60 X 30 X 16MM

Weight: 16g

MODBUS RTU protocol please refer to : '' PTA9B01 PT100 RS485 sensor protocol ''

PT100 sensor specifications:

Type: PT100

Probe Diameter: 6.5mm

Probe Length: 30mm

Probe Material : Stainless steel

Cable Length: 0.5M

PTFE sheath 3-Wire type

Temperature -200~550°C degree

Shell:

Material: ABS

Outer diameter: 73*36*24MM

Inner diameter: 70*33*21MM

Weight: 16 grams

 

 

For more information, please contact us!!!

 

Typical application:

 Thermostatic Controls

Industrial Systems

Consumer Products

Thermally Sensitive Systems

Measuring instruments

Indoor and outdoor temperature measurement

Temperature in vegetable garden

Weather forecasting, and monitoring

Temperature in Computer Room

Warehouse temperature

 

 

3-wire probe wiring mode: the red wire is connected to P+, and the other two wires of the same color are connected to P- and GND (the ports are not distinguished).

Note: Please remove the jumper, otherwise it will affect the accuracy

2-wire probe wiring mode: red wire connects to P+, blue wire connects to P-.

Note: The jumper must be short-circuited, otherwise it cannot be measured! ! !

RS485 bus wiring diagram:

 

 

 

 

ProductSiteLaunchDate : 2024-07-01T04:46:23.680Z
Size : 100 Kg 25m
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1