Cart 2 india

Specification
Brand : Abrillvt
BulletPoint1 : APPLICATION-Our product is suitable for ATV/UTV/SUV, for Jeep, trucks, etc., and the vehicle can be pulled out of trouble by simple and convenient method
BulletPoint2 : MATERIAL-Abrillvts winch accessories is made of premium quality heavy-duty material, not easily oxidized, and has a longer life
BulletPoint3 : EXCELLENT PERFORMANCE-Our products meet the quality inspection standards and will be randomly checked during the production process to ensure no quality problems
BulletPoint4 : CUSTOMER RIGHTS-Abrillvt always insists on creating good quality auto parts for valuable customers and to customers interests from damage
BulletPoint5 : BUYER NOTICE-Please check picture and specification info verify this is the correct one you need before purchasing
Color : As Shown
FitType : Vehicle Specific
IncludedComponents : Winch&Towing
ItemName : Abrillvt 12V Electric Anchor Winch with Wireless Remote Control Complete Kit and 100ft Rope Saltwater Secure Automatic Reset Circuit Breaker Ideal Fit for 24-Inch Boats Supports Anchors Up to 45 lbs
ItemPackageDimensions_Height : 23 centimeters
ItemPackageDimensions_Length : 39 centimeters
ItemPackageDimensions_Width : 29 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-winches
Manufacturer : Abrillvt
ModelName : 135246
ModelNumber : 135245-5424-1033265581
NumberOfItems : 1
PartNumber : 135245-5424-1033265581
ProductDescription : Product description
Specifications:
Material: Plastic, Iron, Nylon
Color: White
Process: Painting
Voltage: 12v
Amp Draw 12V :10-12 Amps
Anchor Roller（Davit）：Included
Motor Type: DC12V Motor
Maximum Anchor Capacity: 45 lbs
Applicable Boat Length: Up to 24'
Braided Anchor Rope Length: 30.48m/100ft
Rope Release Speed: Free Fall
Rope Recovery Speed: 70 ft/min
Breaking Strength: 317.5kg/700lbs
Switch Control on Anchor: Power UP/Free Fall DOWN
Winch Dimensions (LxWxH): 10.1" x 8.3" x 6.5"
Product Size: 43.5*21.5*17.5cm/17.13*8.46*6.89inch
UPC: Does not apply
How to Installing Anchor Winch on Boat Deck：
The anchor winch can be installed on the fore (front) or the aft (rear) of the boat.
Locate anchor roller and winch on deck in desired location. The anchor roller must be located at the edge of the deck and must be extended over the edge to allow the anchor to clear the deck when it is docked in the anchor roller.
Look below the deck and check for any obstructions underneath the desired anchor roller and winch locations. Make sure there is enough space for the rope spool on the winch to be centered on the anchor roller.
Using a marker, mark the anchor roller and winch mounting holes on the deck.
Note: There are several bolt holes in winch frame to choose from. The easiest to use are the 4 slots (2 on each end of the frame). There are also holes for the battery lead wires so you can route the wires through the deck id you desire.
Remove winch and anchor roller. Drill the holes. Bolt to deck. Use fender washers and/or marine plywood under the deck to ensure the greatest strength and to spread the load.



ProductSiteLaunchDate : 2025-04-25T02:41:38.857Z
Size : medium
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 24101600
Voltage : 739 volts