Cart 2 india

Specification
Brand : furitek
BulletPoint1 : Upgrade the Redcat Ascent-18 1/18 RC crawler with the cutting-edge Furitek Starter 118 2S Brushless Power System, designed specifically to enhance the performance & experience of your RC adventures.
BulletPoint2 : This brushless system supports 2S LiPo batteries only, this system features a plug-and-play setup, making installation a breeze for enthusiasts of all levels.
BulletPoint3 : The smaller & lighter VENOM brushless motor ensures a low center of gravity setup, similar to the stock configuration, providing superior stability & control during intense rock crawling sessions
BulletPoint4 : High-performance 30A/50A brushless ESC utilizing FOC technology, this system delivers powerful, efficient, & smooth operation at both low & high speeds
BulletPoint5 : Compatible with the stock battery, this electronics upgrade is designed to integrate seamlessly into your existing setup, providing an effortless enhancement to your RC crawler.
BulletPoint6 : Moreover, the Furitek Starter 118 offers lifetime free firmware upgrades, ensuring that your system remains up-to-date with the latest advancements and features.
BulletPoint7 : With the PYTHoN PRO ESC and CEDAR motor, your RC car will deliver unmatched performance, whether you're tackling rough terrains or smooth trails. Elevate your Redcat Ascent-18 to new heights with Furitek's premium electronics, designed for enthusiasts who demand the best.
CpsiaCautionaryStatement : no_warning_applicable
Edition : FUR-2531 (motor & ESC)
ExternallyAssignedProductIdentifier : 8936037010014
IncludedComponents : Car ESC & Motor
ItemName : FURITEK Starter 2S BRUSHLESS Power System for 1/18 RC Crawler Redcat ASCENT-18 - Remote Control Car, RC Cars Upgrade Electronics with Brushless Motor & ESC (FUR-2526)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-speed-controls
Manufacturer : FURITEK
ManufacturerMinimumAge : 12
Material : CNC Aluminum
ModelName : Car ESC & Motor
NumberOfItems : 1
PartNumber : FUR-2526
ProductDescription : FURITEK STARTER 118 2S BRUSHLESS POWER SYSTEM FOR REDCAT ASCENT-18
SUPPORT 2S LIPO only
NOTE: Slight modification of the motor mount holes on the stock transmission may be required to get a proper mesh
Features:
- Plug & play
- A smaller and lighter brushless motor VENOM for low C.G. setup same like stock
- High performance and powerful 30A/50A brushless ESC with FOC technology
- Wifi module for wireless connection
- Precision CNC steel pinion for long-lasting operation
- Powerful at low speed but also more powerful and fast at high speed - High torque at low speed crawling
- Super smooth without any cogging at both low and high speed operation
- Compatible with stock battery
- Lifetime FREE firmware upgrade!
Package includes:
- 1 x LIZARD PRO 30A/50A BRUSHED/BRUSHLESS ESC FOR REDCAT ASCENT-18 WITH FOC TECHNOLOGY with enclosing plastic case
- 1 x built-in wifi module
- 1 x VENOM 1212 3450KV brushless motor
- 1 x 11T CNC Steel Pinion
*** Motor Features and Specs:
1. Features:
- 12 Pole hi-torque motor design.
- Super thin (0.2 mm) stator laminations---lower eddy losses---maximizes efficiency.
- Japansese NMB --High RPM ABEC5 bearings.
- Precision balanced rotor, smoothness for best reliability and maximum RPM.
- CNC machined 6061 T6 billet aluminum heatsink can.
- Precision engineered for maximum energy conversion.
- High purity and higher temperature single copper windings, lower copper losses, very good heat dissipating, maximizes efficiency.
2. Specifications:
- KV (RPM/Motor) – 3450
- No-load current @10V – 0.7A
- Watt – 120W
- Battery – 2S
- Resistance – 0.16 Ohms
- Max Current – 10A
- Slot/Pole – 12
- Motor size (mm) – 15.5x20.6
- Shaft (mm) – 1.5x6
- Weight (g) – 17.5
*** ESC Features and Specs:
Features:
- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)
- FOC (Field-oriented control) technology
- Plug & Play designed for REDCAT ASCENT-18 crawlers
- 5V/ 6.5V 2.5A Built-in BEC (config via app)
- Support 2S-3S lipo battery - Mini size and lightweight
- Super easy programming via App on both Android and IOS
- Firmware update available (Bluetooth module required)
- Real-time telemetry up to 10Hz
2. Specifications:
- Support 2S-3S lipo battery (ESC support 3S only, motor only support 2S)
- BIG BEC: 5V or 6.5V 2.5A (No additional BECs necessary when using big Servos)
- Constant current: 30A
- Burst current: 50A
- Built-in power switch
- Built-in wifi module
- Dimension (mm): 28(L)x 15.5(W)
- Weight: 3.7 gram
*** Extra requirement:
- Require external RX/TX. If you want to run with Stock TX. Let use SKU: FUR-2525 or FUR-2530

ProductSiteLaunchDate : 2024-05-15T05:33:54.029Z
SafetyWarning : The product is not intended to use for children
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Unisex Adult
UnspscCode : 25170000