Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : solid hardened steel body with clever anti-kickback design for sharp and long-lasting cutting;
BulletPoint1 : 2-Flute Carbide Tipped; 3/4" Rabbet Depth; 7/8" Cutting Height; 1/2" Shank Diameter
BulletPoint2 : 2" Overall Diameter; BR-04 Bearing
BulletPoint3 : U.S.A. Corporate headquarters and warehouse, located in new York
BulletPoint4 : Commitment to offer the highest consistent quality and innovative products
BulletPoint5 : Industrial grade
CutType : Carbide-Tipped Cut
CutType1 : Rabbeting Cut
CutType2 : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier : 8468941251080
ExternallyAssignedProductIdentifier1 : 637881835058
ExternallyAssignedProductIdentifier2 : 0637881835058
ExternallyAssignedProductIdentifier3 : 00738226109206
ExternallyAssignedProductIdentifier4 : 0000346352122
ExternallyAssignedProductIdentifier5 : 00000346352122
IncludedComponents : 1 Amana Branded Tool
ItemName : Magnate 3505 Rabbeting Router Bit - 3/4" Rabbet Depth, 7/8" Cutting Height, 1/2" Shank Diameter
ItemPackageDimensions_Height : 13.5 centimeters
ItemPackageDimensions_Length : 11.4 centimeters
ItemPackageDimensions_Width : 12.9 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : edge-treatment-and-grooving-router-bits
Manufacturer : Magnate
Material : Carbide Tipped
ModelNumber : RC-2259
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 3505
ProductDescription : It is designed for easy wood joining. Shearing cut brazed at an angle assures smooth, clean cutting results. It can also be used for lap joints and biscuit joining. This carbide tipped bit is specifically designed and manufactured for the high quality precision required by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" overall diameter router bits; Run 10,000 rpm maximum for 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2006-01-06T07:15:04.000-00:00
Size : 3/4" Shank
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1