Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Frigidaire
BulletPoint1 : Manufacturer Model 131644700
BulletPoint2 : Genuine Replacement Part
BulletPoint3 : Frigidaire item
BulletPoint4 : Model number: 131644700
BulletPoint5 : OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time.
BulletPoint6 : As is well known, different computers display different colors, and the actual color may differ slightly from the image below
BulletPoint7 : As is well known, different computers display different colors, and the actual color may differ slightly from the image below
Color : 5pcs
ConnectorType : Screw
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier : 9388338132497
ExternallyAssignedProductIdentifier1 : 696731239255
ExternallyAssignedProductIdentifier2 : 0696731239255
ExternallyAssignedProductIdentifier3 : 00696731239255
IncludedComponents : DC 6-30V Timer Relay Programmable Delay Relay
InputVoltage : 5 volts
IsOemAuthorized : 1
ItemName : Frigidaire 131644700 Handle Dryer
ItemPackageDimensions_Height : 18.7 centimeters
ItemPackageDimensions_Length : 2.9 centimeters
ItemPackageDimensions_Width : 17.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : clothes-dryer-plug-receptacles
Manufacturer : Frigidaire
Material : Resin
MeasurementSystem : Inch
ModelName : 131644700
ModelNumber : 131644700
MountingType : Plug In Mount
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 131644700
OperatingVoltage : 5 volts
PartNumber : 131644700
ProductDescription :

Product parameters:

Voltage: 6V~30V(support micro USB 5.0V)

Output Capacity: can control no more than DC 30V 5A AC or 220V 5A

Quiescent Current: 20mA

Operating Current: 50mA

Operating Temperature: -40℃~85℃

Timing Range: 0.1seconds to 999 minutes(continuously adjustable)

Trigger Signal Source: High voltage level trigger(3.0V~24V), signal ground and system ground are not connected to improve system anti-interference ability(or you can connect them).

Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever . Warning: Relay contact is passive and electricity production; 1 channel has the control function on / off.

Operation Mode:

P1: After triggering signal, switch is connected for "OP" time, then disconnected; within the "OP" time:

P1.1: if trigger signal again, it is invalid.

P1.2: if trigger signal again, restart timing.

P1.3: if trigger signal again, switch is disconnected, stop timing.

P-2: After triggering signal, switch is disconnected for "CL" time, then switch is connected for "OP" time, and disconnect after timing.

P3.1: After triggering signal, switch is connected for "OP" time, then switch is disconnected for "CL" time, and enter loop. If trigger signal during loop, switch is disconnected and stop timing. The loop times (LOP) can be set.

P3.2: After power on, no need trigger signal, switch will be connected for "OP" time, then disconnected for "CL" time, and enter loop. The loop times (LOP) can be set

P-4: Signal holding function. If there is trigger signal, timing will be reset, switch remains connected; when the signal disappears, it will disconnect after "OP" time. During timing, if there is a signal, timing will be reset.

OP: Connect time. CL: Disconnect time. LOP: Loop times(1~999, "---" indicates infinite times).

C-L Sleep mode: within 5 minutes, no operation; ni
ProductSiteLaunchDate : 2014-07-22T00:00:01-07:00
Size : As shown
SpecificationMet : CE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52140000
WebsiteShippingWeight : 0.06 kilograms