ACEIRMC DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller (5pcs)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 3800/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
AgeRangeDescription : adult
Brand : ACEIRMC
BulletPoint1 : Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc.
BulletPoint2 : Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable).
BulletPoint3 : Built-in a diode to provide protection against accidental reverse polarity for the circuits.
BulletPoint4 : If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up.
BulletPoint5 : OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time.
BulletPoint6 : As is well known, different computers display different colors, and the actual color may differ slightly from the image below
BulletPoint7 : As is well known, different computers display different colors, and the actual color may differ slightly from the image below
Color : 5pcs
ConnectorType : Screw
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier : 9388338132497
ExternallyAssignedProductIdentifier1 : 0687117732088
ExternallyAssignedProductIdentifier2 : 687117732088
ExternallyAssignedProductIdentifier3 : 00888511981137
IncludedComponents : DC 6-30V Timer Relay Programmable Delay Relay
InputVoltage : 5 volts
IsOemAuthorized : 1
ItemName : ACEIRMC DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller (5pcs)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : clothes-dryer-plug-receptacles
Manufacturer : ACEIRMC
Material : Resin
MeasurementSystem : Inch
ModelName : HIONJIN -09
ModelNumber : HIONJIN -09
MountingType : Plug In Mount
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : DE91-70063D
OperatingVoltage : 5 volts
PartNumber : 16685
ProductDescription :

Product parameters:

Voltage: 6V~30V(support micro USB 5.0V)

Output Capacity: can control no more than DC 30V 5A AC or 220V 5A

Quiescent Current: 20mA

Operating Current: 50mA

Operating Temperature: -40℃~85℃

Timing Range: 0.1seconds to 999 minutes(continuously adjustable)

Trigger Signal Source: High voltage level trigger(3.0V~24V), signal ground and system ground are not connected to improve system anti-interference ability(or you can connect them).

Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever . Warning: Relay contact is passive and electricity production; 1 channel has the control function on / off.

Operation Mode:

P1: After triggering signal, switch is connected for "OP" time, then disconnected; within the "OP" time:

P1.1: if trigger signal again, it is invalid.

P1.2: if trigger signal again, restart timing.

P1.3: if trigger signal again, switch is disconnected, stop timing.

P-2: After triggering signal, switch is disconnected for "CL" time, then switch is connected for "OP" time, and disconnect after timing.

P3.1: After triggering signal, switch is connected for "OP" time, then switch is disconnected for "CL" time, and enter loop. If trigger signal during loop, switch is disconnected and stop timing. The loop times (LOP) can be set.

P3.2: After power on, no need trigger signal, switch will be connected for "OP" time, then disconnected for "CL" time, and enter loop. The loop times (LOP) can be set

P-4: Signal holding function. If there is trigger signal, timing will be reset, switch remains connected; when the signal disappears, it will disconnect after "OP" time. During timing, if there is a signal, timing will be reset.

OP: Connect time. CL: Disconnect time. LOP: Loop times(1~999, "---" indicates infinite times).

C-L Sleep mode: within 5 minutes, no operation; ni
ProductSiteLaunchDate : 2021-05-25T03:37:32.424Z
Size : As shown
SpecificationMet : CE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300
WebsiteShippingWeight : 0.022046001186075 pounds

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.