Cart 2 india

Specification
Brand : DEWALT
BulletPoint : Carbon Steel
BulletPoint1 : Internally threaded anchor for easy bolt removability and service work
BulletPoint2 : Flanged (lipped) version installs flush for easy inspection and standard embedment
BulletPoint3 : Smooth wall drop-in can be installed flush mounted or below the base material surface
BulletPoint4 : Optionally available with a knurled body
BulletPoint5 : Coil thread version accepts coil rod and typically used for concrete formwork applications
Color : Silver
ExteriorFinish : Carbon,Steel
ExternallyAssignedProductIdentifier1 : 075352063300
ExternallyAssignedProductIdentifier2 : 0075352063300
ExternallyAssignedProductIdentifier3 : 00075352063300
ItemHardness : 303 stainless steel
ItemName : Dewalt 1/2 inches Steel Dropin, Carbon Steel Coil Thread, Internally Threaded Expansion Anchor
ItemPackageDimensions_Height : 5.588 centimeters
ItemPackageDimensions_Length : 17.272 centimeters
ItemPackageDimensions_Width : 8.636 centimeters
ItemPackageQuantity : 1
ItemShape : Block
ItemTypeKeyword : drop-in-anchors
Manufacturer : Powers Fastening Innovations
Material : Stainless Steel 304
Material1 : carbon_steel
Material2 : steel
MeasurementSystem : Inch
ModelNumber : 06330
NumberOfItems : 1
NumberOfPieces : 25
PartNumber : 06330
ProductDescription : Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
Environment
The anchor is designed for use in a Wet environment.

Hole Diameter/Bit Diameter
The anchor requires a 1" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 3-3/16". Therefore, the anchor must be installed so that a minimum of 3-3/16" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 10" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 5" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2014-03-04T00:00:01-08:00
Size : 3/4"
SpecificUsesForProduct : Concrete
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Alloy Steel
UnitCount : 50