Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : Gearhead Zone
BulletPoint1 : THE ULTIMATE CHAIN AND SPROCKET ALIGNMENT TOOL
BulletPoint2 : NEW DESIGN – Designed by a Gearhead to produce the best alignment tool for riders. Developed for long range inspection, fast simple set-ups and precision alignments.
BulletPoint3 : HIGH QUALITY CNC MACHINED – 5 Axis CNC machined aluminum body with beautiful black anodized finish. Will not scratch or dent.
BulletPoint4 : LASER PRECISION - Laser Centerline and Clamp Face Leg are Coplanar to ensure precision alignment.
BulletPoint5 : MAXIMIZE HORSEPOWER – Precision aligns your Moto to reduce drive train friction and ensure you are achieving maximum power. Straight, aligned drive trains will also increase Chain and Sprocket life.
BulletPoint6 : PRECISION ALIGNMENT – Do the job right, no more eye balling with short steel rods.
BulletPoint7 : FACTORY CERTIFIED – Accurate within 1mm (.04”) over 1 meter (3.93’).
BulletPoint8 : APPLICATION - Used on Motorcycles, ATVs and Karts
ExteriorFinish : Machined
IncludedComponents : Tool Assembly
ItemName : Chain & Sprocket Alignment Tool - Laser Application
ItemPackageDimensions_Height : 11.4046 centimeters
ItemPackageDimensions_Length : 10.9982 centimeters
ItemPackageDimensions_Width : 10.9982 centimeters
ItemTypeKeyword : automotive-drive-train-tools
Manufacturer : Gearhead Zone
Material : Metal
ModelName : Chain and Sprocket Alignment Tool
ModelNumber : AT-101
NumberOfItems : 1
PartNumber : AT-101
ProductDescription :

The Ultimate Chain and Sprocket Alignment Tool. Simple to set-up with Laser Precision. Attach the tool to the rear sprocket, check alignment along the length of the chain or between sprockets, adjust as required re-check to verify correct alignment and you’re done.

The body of the tool is CNC machined aluminum. The key features of the machined body are the laser hole and the clamp leg face. Both are machined in the same set up to ensure a coplanar relationship is maintained between both. As the leg of the clamp sits flush on the sprocket during use the centerline of the laser will follow accordingly.

The laser is nested in the clamp body and activates by use of an on off push switch. There is also a cylindrical pocket machined into the clamp body which is used to house spare batteries.

The tool assembly also consists of a screw sub assembly. The screw material is nylon, chosen so it will not scratch the sprocket face during set-up and use.

During assembly the alignment is checked over distance on a precision ground fixture and is factory certified, no adjustment is required by the user.
ProductSiteLaunchDate : 2024-03-21T17:56:00.863Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
WarrantyDescription : 1 Year