Cart 2 india

Specification
BatteriesIncluded : 1
Brand : Scangrip
BulletPoint1 : An innovative power supply system developed by SCANGRIP - Easily you can insert a new, fully charged battery and continue the work while another battery is charging. Or you can simply add the charger directly to the lamp to get power supply.
BulletPoint2 : You are never left in the dark with the integrated battery backup system.
BulletPoint3 : Optimal for use in tough environments as it is waterproof (IP67).
BulletPoint4 : FOR CONCRETE ONLY-Provides consistent holding values
BulletPoint5 : NUTS AND WASHERS INCLUDED-Ready to install; simple and fast
Color : No Color
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier1 : 5708997360033
ExternallyAssignedProductIdentifier2 : 05708997360033
ExternallyAssignedProductIdentifier3 : 0008236767490
ExternallyAssignedProductIdentifier4 : 0008236767513
ExternallyAssignedProductIdentifier5 : 00008236767513
ExternallyAssignedProductIdentifier6 : 00738287120585
FinishType : Zinc
Hazmat1 : LITHIUM ION BATTERIES
Hazmat10 : DE_SmallLithiumIonBatteryStandalone
Hazmat11 : EG_SmallLithiumIonBatteryStandalone
Hazmat12 : ES_SmallLithiumIonBatteryStandalone
Hazmat13 : FR_SmallLithiumIonBatteryStandalone
Hazmat14 : GB_SmallLithiumIonBatteryStandalone
Hazmat15 : IN_SmallLithiumIonBatteryStandalone
Hazmat16 : IT_SmallLithiumIonBatteryStandalone
Hazmat17 : JP_SmallLithiumIonBatteryStandalone
Hazmat18 : MX_SmallLithiumIonBatteryStandalone
Hazmat19 : NL_SmallLithiumIonBatteryStandalone
Hazmat2 : UN3480
Hazmat20 : PL_SmallLithiumIonBatteryStandalone
Hazmat21 : SA_SmallLithiumIonBatteryStandalone
Hazmat22 : SE_SmallLithiumIonBatteryStandalone
Hazmat23 : SG_SmallLithiumIonBatteryStandalone
Hazmat24 : TR_SmallLithiumIonBatteryStandalone
Hazmat25 : US_SmallLithiumIonBatteryStandalone
Hazmat26 : ZA_SmallLithiumIonBatteryStandalone
Hazmat27 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryStandalone
Hazmat5 : AU_SmallLithiumIonBatteryStandalone
Hazmat6 : BE_SmallLithiumIonBatteryStandalone
Hazmat7 : BR_SmallLithiumIonBatteryStandalone
Hazmat8 : CA_SmallLithiumIonBatteryStandalone
Hazmat9 : CN_SmallLithiumIonBatteryStandalone
IncludedComponents : item
ItemDisplayDimensions_Height : 1 millimeters
ItemDisplayDimensions_Width : 1 millimeters
ItemDisplayWeight : 1.9 pounds
ItemName : SCANGRIP SPS BATTERY 4AH for MULTIMATCH 3 and NOVA 4 SPS
ItemPackageDimensions_Height : 12.9 centimeters
ItemPackageDimensions_Length : 5.4 centimeters
ItemPackageDimensions_Width : 9.3 centimeters
ItemPackageQuantity : 1
ItemShape : Block
ItemTypeKeyword : drive-anchors
Manufacturer : Scangrip
Material : Steel
Material1 : Carbon Steel Yellow Zinc
Material2 : Carbon Steel Yellow Zinc
Material3 : Carbon Steel Yellow Zinc
Material4 : Carbon Steel Yellow Zinc
Material5 : Carbon Steel Yellow Zinc
MaximumShearStrength : 2550
MeasurementSystem : Inch
ModelName : Multimatch 3
ModelNumber : 36003
NumberOfBoxes : 1
NumberOfItems : 100
NumberOfLithiumIonCells : 3
NumberOfPieces : 100
PackageLevel : unit
PartNumber : 036003
PowerSourceType : ac
ProductDescription : Applications
The anchor is made from Carbon Steel, and is Yellow Zinc. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/8".

Length Anchor
The length of the anchor is 3-1/2"
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/2". Therefore, the anchor must be installed so that a minimum of 1-1/2" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-5/8". This will ensure that the minimum embedment of 1-1/2" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 7/16".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2019-02-20T07:25:09.424Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 11.1 volts