Cart 2 india

Specification
Brand : DIG
BulletPoint : Made in the USA
BulletPoint1 : Available in 90 degree, 180 degree, 360 degree, and strip patterns and used for closely spaced plantings
BulletPoint2 : Recommended for flowerbeds, groundcovers, shrubs or for areas where low flow overhead irrigation is desired
BulletPoint3 : Available completely assembled on 13" spike with 24" (.160 id x 270 od) micro tubing and barb or threaded barb
BulletPoint4 : Two piece micro sprayer consisting of spray cap and threaded base for installation flexibility
BulletPoint5 : Efficient and reliable method to apply water
Color : Blue
ControlType : Adjustable
ExternallyAssignedProductIdentifier1 : 013158999966
ExternallyAssignedProductIdentifier2 : 0013158999966
ExternallyAssignedProductIdentifier3 : 00013158775003
FitType : Barbed
GpsrSafetyAttestation : 1
IncludedComponents : DIG 111B Drip Irrigation Spray Jet 180 Degree Blue - 10 Pack
ItemName : DIG 111B 180 Degree Drip Irrigation Spray Jet, (10 Pack), Blue
ItemPackageDimensions_Height : 9.7028 centimeters
ItemPackageDimensions_Length : 1.0922 centimeters
ItemPackageDimensions_Width : 8.3058 centimeters
ItemPackageQuantity : 1
ItemShape : Cylindrical
ItemTypeKeyword : automatic-lawn-drippers
Manufacturer : DIG
Material : Plastic
Material1 : Plastic
Material2 : Silicone
Material3 : Polyethylene
MaximumFlowRate : 70 liters_per_hour
MaximumPressure : 50 pounds_per_square_inch
ModelName : MLS-V10
ModelNumber : 111B
NumberOfBoxes : 1
NumberOfItems : 20
NumberOfPieces : 2
NumberOfPorts : 3
NumberOfSets : 50
PartNumber : 111B
PlantOrAnimalProductType : plastic
PowerSourceType : Water Pressure-driven
ProductDescription : 10-Count Bag of NEW Flow Restrictors Use this NEW Flow Restrictor to replace damaged violet flow controls on the CURRENT AND OLDER VERSION (MLS-V10-OLD) of the micro-stake assemblies. This newly designed and improved Violet Flow Restrictor minimizes clogging as it does not contain a diaphragm To Install, push the slanted angled barbed end into the ¼” Vinyl Tubing, and then push the blunt barbed end with a small orifice into the ½” Poly Tubing. This New Flow Restrictor does not need an internal diaphragm to help keep water flow consistent at various water pressures. This Flow Restrictor allows you to install more micro-stake assemblies per run. With a beginning water pressure of 40 to 50 PSI, you can run up to 40 of our micro-stake assemblies with a consistent flow of 9 to 15 GPH per each micro- spray. When installing a lesser amount of our micro-stake assemblies per run with a beginning water pressure of 40 psi, there is a consistent water flow of approximately 15 gph from each micro spray. In the event this NEW Flow Restrictor had a piece of debris block the orifice, simply pull the barbed end out of the ½” Poly and use our Yellow Cleaning Tool or a small paper clip to clear the orifice, then push the barbed end back into the1/2” Poly Tubing. Next, unthread the micro spray from the top of the Stake Assembly and turn on the water to flush the ¼” vinyl of debris for a few seconds and then re-thread the micro spray back into the top of the Stake. (10 New Violet Flow Restrictors Per Bag)
ProductSiteLaunchDate : 2013-09-26T10:51:44.379Z
SafetyWarning : Always follow safety guidelines when handling plastic components, connecting to water sources, and installing the drip irrigation system to prevent leaks and water damage.
Size : 56 Count (Pack of 7050)
SkipOffer : 1
Style : Minimalist
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : spray jet
VolumeCapacityName : 1 GPH