Cart 2 india

Specification
Brand : GMSLuu
BulletPoint1 : 【Main Parameters】Displacement: 52cc; power & speed: 1900W(2.3HP)/6500r/min; torque & speed: 2.5N.m/5500r/min; Impact frequency: 1300-3000BPM; Fuel consumption rate: ≤0.6L/h. Suitable for fencing, star pickets, posts, stakes, pipe driving, gardening, agriculture, geophysical exploration, construction, etc.
BulletPoint2 : 【Comfortable and Durable Material】The heavy-duty aluminum drive housing is lightweight, easy to operate, and durable. The soft, non-slip rubberized plastic sponge handle greatly reduces machine recoil, making it easy to grasp and use.
BulletPoint3 : 【Stable Operation】Our T-post driver is two-stroke powered, it doesn't pull cylinders or stall easily even when the temperature is high. Its max rotational speed reaches up to 6500r/min with a power of 1900W(2.3HP), which is very efficient.
BulletPoint4 : 【Easy Recoil Starter】When you are using the pile driver, you just need to pull the starter quickly and coherently, which is very easy to start and save efforts. Adopting a high-quality carburetor, which can make gasoline fully burned when running, avoiding gasoline waste and saving money for you.
BulletPoint5 : 【Large Capacity Semi-transparent Fuel Tank】This pile driver has a 1L/0.26gal large capacity fuel tank. And the fuel tank is semi-transparent, so you can keep an eye on the usage of the fuel, which brings you a more reassuring feeling of use.
Color : Black+red
ConnectivityProtocol : X-10
CurrentRating : 16 amps
DrillType : earth_drill
ExternallyAssignedProductIdentifier : 7640479158982
ExternallyAssignedProductIdentifier1 : 0765954740548
ExternallyAssignedProductIdentifier2 : 765954740548
IncludedComponents : Bare-Tool
IncludedComponents1 : Post Driving Head
IncludedComponents2 : Mixing Oil Bottle 
IncludedComponents3 : Tools Kit
InternationalProtectionRating : IP65
IsElectric : 1
ItemName : 52CC Farm Fence Gasoline Pile Driver, 2 Stroke Gas Powered Heavy Duty T-Post Driver Manual Gas Powered Piledriver Farm Fence Gasoline Push Pile Kit
ItemPackageDimensions_Height : 13 inches
ItemPackageDimensions_Length : 28.7 inches
ItemPackageDimensions_Width : 17 inches
ItemPackageQuantity : 1
ItemTorque : 1.85 inch_pounds
ItemTypeKeyword : power-drill-drivers
Manufacturer : HUMuu
Material : Metal
Material1 : ABS
Material2 : Steel
MaximumChuckSize : 0.5 inches
MaximumPower : 1900 watts
MaximumRotationalSpeed : 6500 rpm
MaximumTorque : 2.5 newton_meters
ModelName : Post Driver
ModelNumber : OT-MLLCR-1810-LKR
NumberOfItems : 1
NumberOfSpeeds : 1
OperatingVoltage : 24 volts
PartNumber : OT-303-1
PowerSourceType : gas power
PowerSourceType1 : Manual
PowerSourceType2 : Gas Powered
ProductDescription :

Details

2 Post Driving-head: The 2 post-driving heads (55-70mm/2.17-2.76in) make this a perfect choice for T-Posts, Y-Posts, and ground rods.

Anti-slip Handle: The non-slip handle has comfortable anti-slip shock absorption, effectively reducing fatigue at work.

Specification

Engine Type: Two-stroke, Air Cooling, Single-cylinder

Displacement: 52cc

Fuel Tank Capacity: 1L/0.26gal

Fuel Consumption Rate: ≤0.6L/h

Impact Frequency: 1300-3000BPM

Impact Energy: 20-55J

Carburetor Type: MZ15-048

Spark Plug Type: BM6A

Starter System: Hand Pull Start

Fuel Type: Mixed Oil (25 Gasoline: 1 Motor Oil)

Size: approx. 74*34*26cm/29.13*13.39*10.24in

Post Driving Head Mount Size: 55-70mm/2.17-2.76in

Max. Power & Speed: 1900W(2.3HP)/6500r/min

Max. Torque & Speed: 2.5N.m/5500r/min

Package Included

1 x Petrol Post Driver

2 x Post Driving Head

1 x Mixing Oil Bottle

1 x Tools Kit

Notes

1.If the pile driver has the problem of not hammering. Then you need to check whether you have added too much grease, clean up the excess oil in the cylinder before disassembly, and re-add about 20g of high temperature resistant grease.

2.If the impact frequency is too high, you can reduce the speed of the carburetor slightly if you can't hold it by hand. Otherwise, the impact frequency should be increased.

3.If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil. Start the rope pull out an arm's length, and pull it two or three times in a row to start. When the machine starts cold, close the damper, and then open the damper after the machine is normal.

ProductSiteLaunchDate : 2022-04-11T16:22:54.117Z
RegulatoryComplianceCertification : NSDOS.0384EM-005
Size : 29.1*13.3*10.2in
Speed : 6500 rpm
Style : 52cc
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Trigger Switch
TerminalType : Button
UnitCount : 1
UnspscCode : 27112800
Voltage : 24 volts
Wattage : 1900 watts