Cart 2 india

Specification
Brand : BRIXWELL
BulletPoint1 : Easy-to-Install
BulletPoint2 : Eliminates Drafts
BulletPoint3 : Theft-Proof Locking Device
BulletPoint4 : Please note before purchasing: The small size is suitable for doors with a thickness of 1.38 - 2.16 inches and a door gap width of 0.12 - 0.78 inches. The large size is suitable for doors with a thickness of 2.17 - 3.15 inches and a door gap width of 0.12 - 0.78 inches. Please measure the dimensions carefully before placing an order.
BulletPoint5 : Easy Installation: First, insert one end of the sealing strip into the door bottom gap. After pushing it in, cut off the excess part. Make sure the bottom of the sealing strip gently touches the ground. Then, stick the complimentary adhesive tape on the outermost side for fixation. And that's it! The installation is simple and convenient.
BulletPoint6 : Warm reminder: Our product is shipped in a rolled - up form. If you find it bent when opening the package, this is a normal phenomenon. Please don't worry. You can stick it on the door first. The product will fully recover within two to three days (depending on the temperature and time).
Color : Polished Stainless
CustomerPackageType : 1
ItemName : Brixwell 834SPS Polished Stainless Steel 5-5/16" No-Draft Speak-Thru
ItemPackageDimensions_Height : 0.7 inches
ItemPackageDimensions_Length : 5.5 inches
ItemPackageDimensions_Width : 5.5 inches
ItemPackageQuantity : 1
ItemShape : shape
ItemTypeKeyword : under-door-draft-stoppers
Manufacturer : Brixwell
Material : Stainless Steel
ModelName : 834SPS
ModelNumber : 834SPS
NumberOfItems : 1
PartNumber : 834SPS
ProductDescription : Our No-Draft Speak-Thrus are designed to allow audible transmission of voice requests at ticket windows, box offices, and more. They prevent tampering from the outside and stop drafts to the interior. The 549 Series is made of brass, the 834 Series is made of aluminum. Each unit is individually boxed with gaskets and mounting screws for installation on glass from 1/4" (6 mm) to 1/2" (12 mm) thick. For glass up to 3-3/4" (95 mm) thick you can use the optional Cat. No. 8324 4" (102 mm) screws. No-Draft Speak-Thrus require a minimum hole diameter of 2-1/4" (57 mm), and will cover holes up to 4-1/4" (108 mm). The recommended hole diameter is 3-1/2" (89 mm).
SPECIFICATIONS:
Material: Stainless Steel
Finishes: Satin Anodized, Brite Anodized, Brite Gold Anodized, Duranodic Bronze ans Polished Stainless Steel
Instructions Included
Glass Fabrication Required: Recommended 3-1/2" (89 mm) Diameter Hole
Screws Included: 1 each 8-32 x 1/2", and 1 each 8-32 x 3/8"
ProductSiteLaunchDate : 2022-02-08T18:31:20.373Z
Scent : scent
Size : 5 5/16"
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52150000