Cart 2 india

Specification
Brand : MISSION
BulletPoint : FOR INFLATABLES, NOT BOATS - Bungee lines designed for boats won’t cut it for absorbing shock from lighter-weight objects like an inflatable. Lines designed for boats don't absorb shock unless you have a ~6000 lb boat on the other end; you might as well tether your inflatable with a static dock line.
BulletPoint1 : Triple Braided High Strength Polyester dock lines: Twisted and braided using three strands of high strength polyester rope for a tight construction. The boat dock lines is 2/5 inch (0.4 cm) in diameter and 6.6 feet (2 meters) long, with 1.9 inch grommets spliced into one end of the rope for easy fastening of knots. Cost-effective compared to other high-performance materials.
BulletPoint2 : HIGH ABRASION RESISTANCE: The high strength polyester boat rope is highly abrasion resistant and is suitable for use in places where there is frequent contact with hard surfaces, such as docks and decks. This makes it perform well in scenarios such as boat mooring and towing.
BulletPoint3 : High tensile strength: Multi-stranded thick rope stranded tightly, hard feel, high density, uniform force, high tensile strength, able to withstand greater tensile force, suitable for use in different heavy-duty operations, such as anchor ropes, rock-climbing ropes, tubing ropes and so on.
BulletPoint4 : Non-corrosive: Polyester boat fenders are highly resistant to a wide range of chemicals and are particularly suitable for use in marine conditions as the salt in seawater does not damage them.
BulletPoint5 : Stretch: Dock ropes and elongation is small, not easy to aging, can maintain the shape under tension, not easy to deformation. This is an important advantage in operations where tension needs to be maintained, making it a good pontoon boat accessory!
Color : Orange
CompatibleWithVehicleType : Watercraft
ExternallyAssignedProductIdentifier1 : 0810065482686
ExternallyAssignedProductIdentifier2 : 810065482686
ExternallyAssignedProductIdentifier3 : 00040011940223
GpsrSafetyAttestation : 1
IncludedComponents : Stainless Steel Clip
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 24 inches
ItemDisplayDimensions_Width : 5.5 inches
ItemDisplayWeight : 1.6 pounds
ItemName : MISSION Boat Gear Shock Absorbing Tether Line for Inflatables and Water Mats
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 6.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : dock-lines-and-rope
LoadCapacity : 6000 pound
Manufacturer : MISSION Boat Gear
Material : Thermoplastic Polyurethane
ModelName : iririi202403
ModelNumber : RFAY-002-OR
NumberOfItems : 2
NumberOfPieces : 1
PackageLevel : unit
PartNumber : RFAY-002-OR
PartTypeId : 308
ProductDescription :

No more jerking your water or lake mat around. The perfect tether line for securing your inflatable. The integrated bungee section reduces impact on D-rings, handles, cleats and lift rings. The carabiner and loop make attachment fast. This 12-FT shock-absorbing tether line is perfect for securing your REEF inflatables.

MISSION’s Shock Absorbing Tether Line for Inflatables comes with:

(1) 12-ft x 1/2" Shock-Absorbing Tether Line

ProductSiteLaunchDate : 2024-07-01T16:43:36.088Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : 12-FT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31151900
WarrantyDescription : One year warranty