Cart 2 india

Specification
Brand : Fenduoer
BulletPoint1 : 【Thread Type】The DIN Valve thread type is M18*1.5,The thread for pressure gauge is 7/16 inch.
BulletPoint2 : 【Double 6000psi Pressure Gauge】The scuba adapter with tewo gauge,one manometer F shows the output pressure,another manometer E shows the pressure in the cylinder.
BulletPoint3 : 【Easy Connection】With 8mm quick plug,can be connected with the female quick plug on the air compressor.
BulletPoint4 : 【Quick Release】With release valve,turning on the release valve to release the remaining gas in the hose before you disconnect the device.
BulletPoint5 : 【Long Spring Hose】The Scuba adapter comes with 24 inch long spring hose, will be safter when using.
BulletPoint6 : 【Wide Application】It is widely used in PCP cylinders,high pressure cylinders, SCBA cylinders or for air/carbon dioxide filling.
Color : Black
Department : unisex-adult
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0717206743807
ExternallyAssignedProductIdentifier2 : 717206743807
ImportDesignation : Imported
IncludedComponents : scuba adapter with gauge
ItemName : Fenduoer M18x1.5 DIN Valve Scuba Adapter with Dual Gauge,High Pressure 30 Mpa/300bar/4500psi with 24-inch-Long Black Filling Air Hose for HPA Tank,Air Tank,Paintball Scuba Fill Stations,PCP Air Rifle
ItemPackageDimensions_Height : 3.15 inches
ItemPackageDimensions_Length : 5.08 inches
ItemPackageDimensions_Width : 3.82 inches
ItemTypeKeyword : diving-tank-accessories
ItemTypeName : Scuba adapter
Manufacturer : Fenduoer
Material : Stainless Steel
ModelName : DTA-01
NumberOfBoxes : 1
ProductDescription : 1.There are three kind of thread for your optional,M18*1.5,5/8-18UNF and 7/8-14UNF. 2.Two pressure gauge design:one manometer F shows the output pressure,another manometer E shows the pressure in the cylinder. 3.With 8mm quick plug,can be connected with the female quick plug on the air compressor. 4.The top of the knob is an ON/OFF(not kind of adjustable adapter),outlet port position together with a 60cm high pressure spring hose. 5.The thread for pressure gauge is 7/16. 6.With release valve,turning on the release valve to release the remaining gas in the hose before you disconnect the device.
ProductSiteLaunchDate : 2024-03-21T14:44:14.314Z
Size : 24 inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WarrantyDescription : No