Specification Brand : Generic ItemName : Occus One-piece Standard Hub Stainless Steel 303 Precision Tapered Dispensing Tip - (Color: 0.8mm) ItemTypeKeyword : dispensing-needle-accessories Manufacturer : Generic PartNumber : OCS-639FD78974F6E180509A31915B9B2ACD ProductDescription : One-piece Standard Hub Stainless Steel 303 Precision Tapered Dispensing Tip The One-piece Standard Hub Precision Tapered Dispensing is made from High Quality Stainless Steel 303. It provides a hard, abrasion resistant nozzle with low resistance to fluid flow. It features thin and rigid wall, resulting in a smaller outer diameter (OD) required for large inner diameter (ID) fluid paths. This can be particularly useful where a small gauge tip is needed, without compromising on fluid dispense rates. The thin walls further enhance the accuracy and definition of dots, lines or special patterns, and dramatically reduce fluid stringing or tailing tendencies. It was designed for accurate dispensing of dots, beads or in-fills. Their streamline conical fluid path delivers considerably gher fluid flow rates and lower dispense pump back pressures than most standard dispensing tips. This results in improved dispensing accuracy and component life. The thin wall nozzle cores are produced using a deep drawing process, giving particularly low resistance to fluid flow, and exceptional accuracy and robustness compared to plastic dispensing tips or nozzles. It was measured by metric unit mm with outlet size ranging from 0.2mm to 1.0mm to meet different dispensing applications. To correct read the specification that was marked on the tip, please follow the digit "40" means outlet 0.4mm, "20" means 0.2mm, "80" means 0.8mm, and so on. Item specifics: Usage: Commercial Manufacture Material: Stainless Steel Is customized: No Model number: - Type: Power Tool Parts ProductSiteLaunchDate : 2023-07-04T10:49:56.206Z UnitCount : 1