Cart 2 india

Specification
Brand : LiFuJunDong
BulletPoint : Drywall Sander
BulletPoint1 : 1. Fix the plaster trimmer on the workbench first, and tighten the four anchor screws to avoid vibration.
BulletPoint2 : 2. Tighten the water inlet pipe and the connector first to avoid falling off and splash the water into the motor to burn the motor.
BulletPoint3 : 3. Tighten all connecting screws of the machine to prevent loosening. 4. Turn on the power, observe whether the motor has abnormal noise, whether the sand piece rotates smoothly, if there is any abnormality, stop immediately and overhaul.
BulletPoint4 : 5. Observe whether the water supply has the function of removing dust and adhering gypsum powder on the sand. If the effect is not good, adjust the water pressure.
BulletPoint5 : 6. The angle adjustment of the sander is light and flexible, <30 degrees, it can be polished to different angles from 75 degrees to 105 degrees. .
Color : Multi
CompatibleDevices : drywall sander
ConstructionType : Coated
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0738631520405
ExternallyAssignedProductIdentifier2 : 738631520405
ExternallyAssignedProductIdentifier3 : 00039564506437
IncludedComponents : 7" Horizontal Angle Sander
IncludedComponents1 : Home Power Tools Sander
IncludedComponents2 : Home Power Tools Sander
IncludedComponents3 : Home Power Tools Sander
IncludedComponents4 : Home Power Tools Sander
IncludedComponents5 : Home Power Tools Sander
IndustryStandardIdentifier : BNR1841
ItemName : JT-19 D ental Wet Model Trimmer 2800rpm Abrasive Gypsum Arch Inner Disc Wheel Gypsum Dressing Machine Gypsum Sanding Machine 110V
ItemPackageDimensions_Height : 29.8 centimeters
ItemPackageDimensions_Length : 11.9 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : power-disc-sanders
Manufacturer : LiFuJunDong
Material : Aluminum Oxide Blend
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
MaximumCurrent : 5 amps
MaximumRotationalSpeed : 2800 rpm
ModelName : M643
ModelNumber : M643
NumberOfItems : 1
PackageLevel : unit
PartNumber : JT-19
Pattern : Sander
PowerSourceType : Corded Electric
ProductDescription :

Specifications

Voltage: 110V/60Hz±10%

Power: 500W Rotational Speed: 2800 rpm

Dimensions: 44×35×35cm Weight : 20kg

Features:

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the waste-disposal tube to the unit

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8

Precautions

1. Be sure to clean the gypsum debris left in the machine at any time to make the drainage smooth.

2. If the drainage is not smooth enough and the water overflows, the power supply will be short-circuited, causing damage to the machine and personal electric shock.

3. Can not be used without water, so as to avoid gypsum greasy flat, affecting the use

4. The water pressure should not be greater than 2kg/cm.

Attention:

If there is some abnormal noise when working on

Possible reason：① Axon is loosing ② Disc is not plain enough.

How to solve it：①Dissemble the disc⒃ with spanner，make the snap

Ring tightly；② change the disc.

The machine does not work when power on

Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong.

How to solve it：① change the fuse（22） which inside the socket；② change the motor；③ change theProductSiteLaunchDate : 2016-10-31T06:14:56.011Z
Size : 7 Inch
StreetDate : 2013-12-20T00:00:01Z
Style : Head Mounted Motor + 6369SP60 Sandpaper
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
Voltage : 110 volts