Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
The Radial Headload Prodigy is a device that is intended to simulate the sound of a guitar cabinet and allow the user to reduce the sound level by 50% on stage or perform without noise in the studio. That said, the following specifications do not provide any truly significant information as it is completely dependent on the amplifier and speaker cabinet in use. As such, we ask you to please review with the awareness that these measurements are truly subjective in nature.
Features
1) Load box with 100%, 50% and 25% silent attenuation Lets you drive your amp hard for best tone Custom-made, cement-encrusted ceramic-coated resisters Headphone variable control Line out variable control to adjust the level going to the unbalanced 1/4 in. JDX outputs 2-band EQ so you can fine tune the tone of the JDX output Lo-Z balanced mic level output used to feed the PA system, microphone, or recorder Ground Lift lifts pin-1 on the XLR output to eliminate hum a
2) Like the larger Headload, the Prodigy employs custom-made, cement-encrusted, ceramic-coated resister coils to convert the excessive power from the amplifier to heat and is able to comfortably withstand up to 100-watts RMS
3) The Prodigy may be used in three different ways, depending on the need: First, it may be used as a direct box via the built-in Radial JDX Reactor
4) The hugely popular JDX combines a reactive load with a proprietary filter bank to emulate the tone of a 4x12 half stack
5) This features 100% discrete class-A circuitry for optimal tone and transformer isolation to eliminate hum and buzz caused by ground loops
Specification
Brand : Radial
EAN : 0676101043811
Label : Radial
Manufacturer : Radial
Model : R800 7068 00
PackageDimensions_Weight : 665.00 hundredths pounds
PackageDimensions : L:13.50 X W:8.50 X H:4.50
ProductGroup : Musical Instruments
ProductTypeName : SOUND_AND_RECORDING_EQUIPMENT
Publisher : Radial
Studio : Radial
Title : Radial Headload Prodigy Speaker Load Box w/DI and EQ
The Radial Headload Prodigy is a device that is intended to simulate the sound of a guitar cabinet and allow the user to reduce the sound level by 50% on stage or perform without noise in the studio. That said, the following specifications do not provide any truly significant information as it is completely dependent on the amplifier and speaker cabinet in use. As such, we ask you to please review with the awareness that these measurements are truly subjective in nature.
Features
1) Load box with 100%, 50% and 25% silent attenuation Lets you drive your amp hard for best tone Custom-made, cement-encrusted ceramic-coated resisters Headphone variable control Line out variable control to adjust the level going to the unbalanced 1/4 in. JDX outputs 2-band EQ so you can fine tune the tone of the JDX output Lo-Z balanced mic level output used to feed the PA system, microphone, or recorder Ground Lift lifts pin-1 on the XLR output to eliminate hum a
2) Like the larger Headload, the Prodigy employs custom-made, cement-encrusted, ceramic-coated resister coils to convert the excessive power from the amplifier to heat and is able to comfortably withstand up to 100-watts RMS
3) The Prodigy may be used in three different ways, depending on the need: First, it may be used as a direct box via the built-in Radial JDX Reactor
4) The hugely popular JDX combines a reactive load with a proprietary filter bank to emulate the tone of a 4x12 half stack
5) This features 100% discrete class-A circuitry for optimal tone and transformer isolation to eliminate hum and buzz caused by ground loops
Specification
Brand : Radial
EAN : 0676101043811
Label : Radial
Manufacturer : Radial
Model : R800 7068 00
PackageDimensions_Weight : 665.00 hundredths pounds
PackageDimensions : L:13.50 X W:8.50 X H:4.50
ProductGroup : Musical Instruments
ProductTypeName : SOUND_AND_RECORDING_EQUIPMENT
Publisher : Radial
Studio : Radial
Title : Radial Headload Prodigy Speaker Load Box w/DI and EQ
