Cart 2 india

Specification
Brand : Juried Engineering
BulletPoint1 : The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals
BulletPoint2 : 15-V Digital or ±7.5-V Peak-to-Peak Switching, 125-Ω Typical On-State Resistance for 15-V Operation, Frequency Response, Switch On = 40 MHz Typical, 100% Tested for Quiescent Current at 20-V
BulletPoint3 : Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range, On-State Resistance Flat Over Full Peak-to-Peak Signal Range, 5-V, 10-V, and 15-V Parametric Ratings
BulletPoint4 : High On or Off Output-Voltage Ratio: 80 dB Typical at fis = 10 kHz, RL = 1 kΩ, High Degree of Linearity: <0.5% Distortion Typical at fis = 1 kHz, Vis = 5-Vp-p VDD – VSS ≥ 10-V, RL = 10 kΩ, Matched Control-Input to Signal-Output Capacitance: Reduces Output Signal Transients
BulletPoint5 : Extremely Low Off-State Switch Leakage, Resulting in Very Low Offset Current and High Effective Off-State Resistance: 10 pA Typical at VDD – VSS = 10-V, TA = 25°C, Extremely High Control Input Impedance (Control Circuit Isolated From Signal Circuit): 1012 Ω Typical, Low Crosstalk Between Switches: –50 dB Typical at fis = 8 MHz, RL = 1 kΩ
CircuitType : 6-Way
Color : Red
ConnectivityProtocol : X-10
ConnectorType : Quick Connect
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 0799993465629
ExternallyAssignedProductIdentifier2 : 799993465629
ExternallyAssignedProductIdentifier3 : 00702105974483
InternationalProtectionRating : IP54
ItemName : Juried Engineering CD4066BE CD4066 4066 10-pA, 20-V, 1:1 (SPST), 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 (Pack of 5)
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 7.874 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : dip-switches
Manufacturer : TI
Material : PDIP
Material1 : Metal
Material2 : Plastic
MaximumSwitchingCurrent : 24 amps
MaximumSwitchingVoltage : 24 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : CD4066BE
MountingType : din_rail
NationalStockNumber : 5945-01-071-3168
NumberOfItems : 5
NumberOfPositions : 6
OperatingVoltage : 24 volts
OperationMode : Automatic
PartNumber : CD4066BE
ProductDescription : The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device, but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full signal-input range.

The CD4066B device consists of four bilateral switches, each with independent controls. Both the p and the n devices in a given switch are biased on or off simultaneously by the control signal. The well of the n-channel device on each switch is tied to either the input (when the switch is on) or to VSS (when the switch is off). This configuration eliminates the variation of the switch-transistor threshold voltage with input signal and, thus, keeps the on-state resistance low over the full operating-signal range.
ProductSiteLaunchDate : 2020-07-14T21:10:49.232Z
Size : Juried Engineering ESD Safe Packaging (Pack of 5)
SpecificationMet : Din
StreetDate : 2018-08-21T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Toggle Switch
TerminalType : Button,pins
UnitCount : 1
UnspscCode : 32101600
Voltage : 20 volts