Cart 2 india

Specification
AssemblyInstructions : Require Assembly
BaseType : Leg
Brand : DAOKAI
BulletPoint1 : Parameters: Module Working voltage: DC12V ~ 30V (Power Requirements: greater than 100mA), PWM signal receiving frequency range: 1KHz ~ 3KHz.
BulletPoint2 : Function: PWM-to-voltage module able to convert the digital PWM signal into an analog signal 0 ~ 10V.The voltage-to-frequency pulse signal can generate different frequency modules according to the input voltage level.
BulletPoint3 : The output voltage can be fine-tuned: The relationship between frequency and voltage can be calibrated by a potentiometer.The signal input terminal uses optical coupling isolation to ensure anti-interference ability.
BulletPoint4 : Application: PLC can be used for industrial control panel or other signal interface switching, by adjusting the PWM duty cycle to regulate the output voltage.
BulletPoint5 : Package includes: You will get 2 x PWM to Voltage Module 0%-100% PWM to 0-10V, 4 x 50cm 24AWG Cable
BulletPoint6 : 【High Quality】iArkPower HDMI audio extractor splitter supports up to 10ft certified 8K HDMI cable at both input and output ends; made by solid metal enclosure for quick heat dissipation and excellent longevity
BulletPoint7 : 【Package Includes】1x HDMI Audio Extractor, 1x Power Adapter (AC 100-240V 50/60Hz, DC 5V/1A), 1x User Manual
CircuitBreakerType : Standard
Color : PWM to Voltage Module
CompatibleDevices : speaker
CompatibleDevices1 : PC
CompatibleDevices2 : Laptop
CompatibleDevices3 : Camera
ConnectorGender : Male-to-Male
ConnectorType : DVI
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0810162900489
ExternallyAssignedProductIdentifier2 : 810162900489
ExternallyAssignedProductIdentifier3 : 00757901817816
FabricType : 80%linen, 20% Non-waven Fabric
FinishType : Hdmi
GpsrSafetyAttestation : 1
IncludedComponents : 2 x PWM to Voltage Module 0%-100% PWM to 0-10V, 4 x 50cm/19.6inch 24AWG Cable
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InterfaceType : HDMI
InterfaceType1 : HDMI
InterfaceType2 : Optical
InterfaceType3 : 3.5mm Aux
IsAssemblyRequired : 1
ItemName : DAOKAI 2Pcs PWM to Voltage Module 0%-100% PWM to 0-10V Converter Power Module for Digital-to-Analog Signal Interface Switching for PLC with 24AWG Cable
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 2.7 centimeters
ItemPackageDimensions_Width : 6.2 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : digital-to-analog-converters
Manufacturer : DAOKAI
Material : Copper
MinimumSupplyVoltage : 5 volts_of_direct_current
ModelName : Record Player Stand
ModelNumber : WE-DA-095
MountingType : Plug-In Mount
NumberOfBoxes : 1
NumberOfChannels : 2
NumberOfItems : 2
NumberOfLevels : 1
NumberOfPins : 38
NumberOfPorts : 6
PartNumber : WE-DA-095
Pattern : Solid
PowerPlugType : no_plug
ProductDescription : Product parameters：
Module working voltage: DC12V-30V (power requirements: greater than 100MA)
PWM signal receiving frequency range: 1KHZ-3KHZ;
PWM signal input level range:
The peak value is 4.5V to 10V level, and the jumper is inserted at 5V. This type of level signal is mainly aimed at the interface of conventional industrial control card (such as MACH3 board) and 5V CPU;
The peak value is 12 to 24V level, and the jumper is inserted at 24V. This type of level signal is mainly aimed at conventional PLC interfaces.
Conversion range: 0%-100% PWM converted to 0-10V voltage
Allowable error: 5%

Instructions for use：
1. After power-on, when there is no input signal, the output is 0V, and there is input before output. When powering on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM, GND, and the amplitude corresponds to the corresponding jumper. The frequency is 1KHZ-3KH, and the two ports of VOUT and GND are measured with a multimeter. At this time, the meter shows about 5V, adjust the potentiometer on the board, so that the multimeter shows 5.00V, so that the corresponding relationship between your pulse signal and this module is calibrated. When the frequency changes, the correspondence may shift and require recalibration.
2. The output voltage can be adjusted by adjusting the duty cycle.
3. The accuracy can be controlled by adjusting the potentiometer.

Package includes：
2 x PWM to Voltage Module 0%-100% PWM to 0-10V
4 x 50cm/19.6inch 24AWG Cable
ProductSiteLaunchDate : 2023-01-31T01:59:56.747Z
SpecificUsesForProduct : PC, Laptop, Camera
StreetDate : 2020-08-01T00:00:01Z
Style : PWM to Voltage Module
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43201400
UpperTemperatureRating : 140 degrees_fahrenheit
Voltage : 24 volts
WarrantyDescription : Limited warranty
Wattage : 2.4 watts