Cart 2 india

Specification
Brand : Juried Engineering
BulletPoint1 : Single-Supply or Dual Supplies
BulletPoint2 : Wide Range of Supply Voltage: Maximum Rating: 2 V to 36 V
BulletPoint3 : Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator
BulletPoint4 : Low Input Bias Current: 25 nA (Typical)
BulletPoint5 : Low Input Offset Voltage: 2 mV (Typical)
BulletPoint6 : We're a small business from Australia called Derraco Engineering. We take our time designing and making our products, making sure we do it right without taking any shortcuts. We hope that once you try our stuff, you'll remember our name.
BulletPoint7 : Our bullet comparator bushings are designed according to bore riflings. They are not supposed to be the exact size such as .2200 or.3000. Riflings ID is always a bit smaller than the bullet diameter otherwise won't form the gas seal.
BulletPoint8 : Our headspace gauge bushings are in exact marked size as this was made according to SAAMI headspace gauge standards. All our bushings do not have any ID chamfer and they were not sand blasted like some others. The clean sharp edge is designed for accurate measuring of bullet and shoulder contours.
BulletPoint9 : Tip for choosing headspace gauges: measure the neck OD and shoulder OD. The best measuring point should be close to the middle line of the neck OD and Shoulder OD. The middle line of the shoulder taper. Therefore you should just choose which ever headspace bushing with ID nearest to the shoulder taper's middle line diameter.
Color : 10A
ExternallyAssignedProductIdentifier : 7310410801283
ExternallyAssignedProductIdentifier1 : 0719417815847
ExternallyAssignedProductIdentifier2 : 719417815847
IncludedComponents : Q64AD-GH
ItemName : Juried Engineering LM393P LM393 Dual Differential Comparators DIP-8 Breadboard-Friendly (Pack of 15)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : differential-comparators
Manufacturer : TI
Material : PDIP
ModelName : CSCPEXCZ
ModelNumber : LM393P
NumberOfItems : 1
PartNumber : LM393P
ProductDescription : The LM393P consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM393P devices are characterized for operation from 0°C to 70°C.
ProductSiteLaunchDate : 2017-09-29T07:00:00.000Z
Size : 15
SupplierDeclaredDgHzRegulation : other