Cart 2 india

Specification
Brand : Hyuduo
BulletPoint1 : The sealed ball bearing design prevents the entry of contaminants and lubricants.
BulletPoint2 : The rightangle design can achieve tight or angular grinding operations.
BulletPoint3 : Lightweight zinc alloy body, lowvibration design, reduce hand fatigue.
BulletPoint4 : Small size, high power, suitable for working in small spaces.
BulletPoint5 : gear and ball bearing structure extend the life of abrasive tools.
IncludedComponents : No
ItemName : Mini Pneumatic Grinder Portable Mini Air Angle Die Grinder 1/4 Air Inlet Pneumatic Engraving Machine Air Grinding Tool 22000rpm Pneumatic Grinder
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : power-die-grinders
Manufacturer : Hyuduo
ModelName : Hyuduowqby04tg6m
ModelNumber : Hyuduowqby04tg6m
NumberOfBoxes : 1
PartNumber : Hyuduowqby04tg6m
PowerSourceType : ac/dc
ProductDescription : Specification:
Item Type: Pneumatic Grinder
Material: Zinc Alloy
Color: As shown in the picture
Weight: Approx.877g/30.9oz
Product Speed: 22000rpm
Product Chuck Size: Approx.3mm / 0.12in, 6mm / 0.24in
Air Inlet: 1/4
Air Consumption: 0.2m3/min
Application: Home decoration, handicraft polishing, rough trimming, etc.
How to Use
1. Carry out a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality.
2. During operation, the gas pipe must be placed at the back end to pre-vent accidents.
3. Hold the machine with both hands during work and ensure a stable footing.
4. If the gas stops suddenly during work, the switch must be set to the off state immediately.
5. During the grinding and polishing process, apply even force, and it is strictly forbidden to apply too much force or hit the object.

Package List:
1 x Pneumatic Grinder
2 x Chuck
1 x Air Connection
2 x Wrench
1 x Instruction Manual

ProductSiteLaunchDate : 2024-05-29T05:48:11.151Z
UnitCount : 1
UnspscCode : 27112700