Cart 2 india

Specification
Brand : WBTY
BulletPoint1 : Genuine OEM Everflo Diaphragm Pump & Wiring Harness
BulletPoint2 : Specs - Maximum Pump Pressure: 60 PSI. Open Pump Flow: 3.0 GPM. Pump Voltage: 12 VDC. Maximum Pump AMP: 10.0. Pump Ports Type: 1/2" NPT. Self Priming up to 8 Feet. Zinc Plated Steel Fasteners. Plated Steel 3" Motor Shell. Standard Mount Pattern. Wire Harness Length: 8'. Harness Gauge: 16. Harness Amps: 7 max. Harness Connector: 2-pin. Refer to images 2 & 3 for more information
BulletPoint3 : Includes - (1) Everflo 3.0 GPM, 12 Volt, Diaphragm Pump with 1/2" NPT & Manual/Installation Instructions & (1) Wire Harness/Power Cable with Clamps; comes as shown in the first image; comes as shown in the first image
BulletPoint4 : This pump is intended for use in spraying agricultural solutions and other non-flammable liquids. The pump is intended for use in spraying solutions in liquid form ONLY. The pump is NOT intended for use in spraying solutions dry or aerosolized form, or for use with fumigants
BulletPoint5 : It's recommended that standard plastic threaded fittings are used to plumb the inlet/outlet ports; the use of metal fittings or rigid pipe is NOT recommended. Restrictions on the inlet may cause a loss in performance. Inlet pressure must NOT exceed 30 PSI. Can be mounted in any position
Color : Qby4-50al
ExternallyAssignedProductIdentifier : 00197111152121
ExternallyAssignedProductIdentifier1 : 0722047766649
ExternallyAssignedProductIdentifier2 : 722047766649
ImportDesignation : Country as Labeled
IncludedComponents : 1 x Air-Operated Double Diaphragm Pump 1 x Product Manual x 1 Silencer
ItemName : 24V Miniature Diaphragm Pump Vacuum Pump for Air, Liquid
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-diaphragm-pumps
Manufacturer : WBTY
Material : Aluminum
Material1 : Plastic
Material2 : Zinc
MaximumFlowRate : 3 gallons_per_minute
ModelName : QBY4
ModelNumber : WBTYth93w5dxap
NumberOfItems : 1
OperationMode : Automatic
PackageLevel : unit
PartNumber : WBTYth93w5dxap
Pattern : Solid
PowerSourceType : Corded Electric
ProductDescription : Specification:
Features:
It controls the inlet and outlet of the diaphragm, forms the drive mechanism after the power drive to drive the reciprocating movement of the piston, and drives the diaphragm back and forth through the hydraulic pressure to work to suck and discharge the liquid
This pump can rate of 0.4-1L/min, and suitable for working time below 3Bar
Small size, strong structure, and serving life
Chemical stability, could withstand dry rotation, and maintenance
Applications: widely used in instruments and equipment, medicine and chemical industry, home appliances and other fields.
Specification:
Voltage: 24V
rate: liquid (320ml/min), gas (3.2L/min)
Self-priming height: 4 m
Pressure: liquid (3bar), gas (1bar)
rate: 0.4 -1L/min
Ambient temperature: 0-40℃
Size: 8.5*3.3cm/3.4*1.3in
Weight: Approx.239g/8.4oz

Package list:
1 x Diaphragm Pump



ProductDescription1 : INSTALLATION: As far as possible, the pump is fixed next to the liquid being pumped, reducing the length of the water intake pipe and the number of connections, while taking care not to reduce the size of the water intake pipe, where possible, use soft, flexible connections to the pump to reduce and reduce vibration during delivery
ProductDescription2 : TRACHEA MOISTURE：The water in the Compressed air can cause a number of problems, such as freezing or freezing of the exhaust gas, which can make the diaphragm pump inoperable, so it is necessary to install drying equipment in the gas supply system, this will alleviate the problem of freezing or freezing
ProductDescription3 : AIR INTAKE &START：Before starting, open the air valve slowly to 1/2 or 3/4, once the pump starts, then continue to increase to the required air intake, if the air intake increased, the flow did not increase, we should slowly turn off the air valve until we get the best ratio of air flow to liquid flow
ProductDescription4 : CLEAN AND MAINTAIN THE PUMP：When the liquid extracted by the pump is easy to solidify, it should be rinsed after each use, otherwise, the pump may be damaged (the material in the pump may dry or precipitate, which will hinder the movement of the ball and diaphragm) , the user must flush the pump and drain it of water or frozen ice
ProductSiteLaunchDate : 2024-08-23T12:33:01.581Z
Size : DN50(2 IN)
Style : Diaphragm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40151500
Voltage : 12 volts