Cart 2 india

Specification
Brand : goot
BulletPoint1 : Length: Approx. 4.9 ft (1.5 m)
BulletPoint10 : Solder suction line is infused with special non-chlorine flux embedded into copper braid wire
BulletPoint2 : Comes with an ESD compatible case to prevent static electricity
BulletPoint3 : Size (D x W x H): 2.0 x 2.0 x 0.4 inches (51 x 5
BulletPoint4 : RoHS 2 compliant
BulletPoint5 : Country of Origin: Japan
BulletPoint6 : Uses standard RMA compatible flux
BulletPoint7 : Weight: 0.3 oz (9
BulletPoint8 : Line Width: Approx. 0.1 inches (3.0 mm)
BulletPoint9 : Lead free solder compatible
Color : Blue
ExternallyAssignedProductIdentifier : 4975205310161
ExternallyAssignedProductIdentifier1 : 601263548355
ExternallyAssignedProductIdentifier2 : 0601263548355
ExternallyAssignedProductIdentifier3 : 00779008426005
ExternallyAssignedProductIdentifier4 : 5448095610127
ExternallyAssignedProductIdentifier5 : 0733353040958
ExternallyAssignedProductIdentifier6 : 0735090488338
ExternallyAssignedProductIdentifier7 : 0789164419070
HeatingElementType : Ceramic
IncludedComponents : No
ItemDisplayWeight : 0.44 pounds
ItemLength : 5 inches
ItemName : goot CP-3015 Soldering Wire Width 0.12 inch (3.0 mm), Length 5.9 ft (1.5 m), Made in Japan
ItemPackageDimensions_Height : 11.8 centimeters
ItemPackageDimensions_Length : 1.3 centimeters
ItemPackageDimensions_Width : 6.4 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : desoldering-wicks
Manufacturer : 太洋電機産業(goot)
Material : copper
ModelName : CP-3015
ModelNumber : CP-3015
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : CP-3015
Pattern : Single Item
PowerSourceType : Corded Electric
ProductDescription : Tabiger solder remover kit, your must-have tool for soldering and desoldering.

Specification:
Material: aluminum + plasic
Size of solder sucker: 7.48"X0.79”
Size of solder wick: 2.2"X0.2”
Weight of solder sucker: 32g
Weight of solder wick: 10g

How to Use the Desoldering Pump
◆Step 1: Press the plunger down until you hear a click sound;
◆Step 2: Heat up solder around item to be removed by using a soldering iron;
◆Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
◆Step 4: Repeat this process if necessary.How to Use the Solder Wick.

How to Use the Solder Wick
◆Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
◆Step 2: Remove the wick once the solder has been absorbed;
◆Step 3: Cut off the used part of the wick;
◆Step 4: Repeat this process if needed.

Package included:
3*solder sucker
2*solder wick(2.5mm wide and 1.5m in length)

ProductSiteLaunchDate : 2012-09-01T07:39:15.977Z
SafetyDataSheetUrl : https://www.mgchemicals.com/downloads/msds/01%20English%20Can-USA%20SDS/sds-400.pdf
Size : 幅3.0mm
SpecificUsesForProduct : Solder Suction
Style : Normal Type
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1