Specification AgeRangeDescription : adult Brand : ElecGear BulletPoint1 : [2x TMR JoyCon Control Stick] – TMR Replacement for Joy-con controller of Switch LCD, OLED and Lite. The TMR thumbsticks work better than hall effect stick. More linear, accurate, consistent and low power consumption less than 220uA per sensor. Left and right for first Switch ( BulletPoint2 : [Teardown tools included] – The kit is a direct replacement. No desoldering wick and soldering station or wick required in the operation. Teardown the device with Y-tipped and cross screwdriver. Swap the new stick module in and calibrate the new control sticks in built-in settings BulletPoint3 : [What’s in box: TMR-Joycon] – 2x TMR joysticks (Left and Right), 1x Y00 Screwdriver, 1x PH000 Screwdriver, 1x Plastic Opening Tool, 1x Tweezers. ( BulletPoint4 : [HIGH PERFORMANCE] The solder wick braid has good thermal conductivity and solder sucking effect, no need clean with low vestiges. BulletPoint5 : [ALLOY COPPER] Precisely plait with excellent alloy copper wire, which is high temperature and wear resistances. Color : Red/Blue ExternallyAssignedProductIdentifier : 7707240157190 GpsrSafetyAttestation : 1 ItemName : ElecGear 2x TMR Stick Replacement for Switch Joy-Con, TMR Hall Control Stick for Switch LCD, OLED and Lite, No Desoldering Soldering Wick Needed (Red/Blue) ItemPackageDimensions_Height : 15 millimeters ItemPackageDimensions_Length : 122 millimeters ItemPackageDimensions_Width : 72 millimeters ItemPackageQuantity : 1 ItemTypeKeyword : desoldering-wicks Manufacturer : ElecGear ModelName : TMR-Joycon ModelNumber : TMR-Joycon NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : Eujgoov1ra9zgqxto-11 PowerSourceType : DC ProductDescription : Model: TMR-Joycon TMR Joysticks Replacement for Joy-con controller of first Switch LCD, OLED and Lite. ( ProductSiteLaunchDate : 2025-04-19T14:01:51.969Z Size : 1.5mm (1515A) SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 2 UnspscCode : 43211705