Cart 2 india

Specification
Brand : BEEYUIHF
BulletPoint1 : BEEYUIHF Desoldering Wick with Flux Size: Width: 2.5mm/0.10'', Length: 3M/10ft/9.8'
BulletPoint2 : Solder Remover wire Materials：The solder wick braid is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also absorbs the tin more powerfully and no residue. The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
BulletPoint3 : BEEYUIHF #NX942 desoldering wick braid with flux advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards. Add industrial-grade flux and rosin, the ratio is coordinated, the flux can help fully melt the stubborn tin.
BulletPoint4 : The desoldering braid wick #NX942 Feature: Enhanced solder wick and wire, tin suction ability is more excellent, and for the old audio circuit board, can also be very good for tin suction effect. Improve the efficiency of rework and increase the speed of cleaning the PCB pad.
BulletPoint5 : Wide range of use: The braided solder wick is suitable for studio, laboratory, school, professional repair, DIY hobbyist and industrial soldering work; Solder braid wick tape is a handy and practical tool that helps solderers clean solder joints, fix soldering problems, and improve soldering efficiency and quality. Bring convenience to your welding work.
Color : 1.5mm
ExternallyAssignedProductIdentifier : 7845044350154
ExternallyAssignedProductIdentifier1 : 0741754914990
ExternallyAssignedProductIdentifier2 : 741754914990
FinishType : Finish
HeatingElementType : Ceramic
IncludedComponents : 1 x Desoldering Wick
ItemName : BEEYUIHF No Clean Desoldering wick Braid, No residue Solder wick Braid with Flux, Solder Remover wire Kit, Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (Pack of 1Pcs) #NX942
ItemPackageDimensions_Height : 10.6934 centimeters
ItemPackageDimensions_Length : 0.889 centimeters
ItemPackageDimensions_Width : 6.604 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desoldering-wicks
Manufacturer : BEEYUIHF
Material : lead
ModelName : Desoldering wick
ModelNumber : 1 Pack
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : WJJ-263d
PowerSourceType : hand_powered
ProductDescription :

BEEYUIHF 3M/10ft Desoldering Wick Braid, 2.5mm/0.10'' Width Solder Wick Braid With Flux, No-Clean Soldering Wick Wire Roll Remover tool, Desolder wick Braid, Disassemble Electrical Components

Product Specification:
Model: Solder Wick
Length: 3M/10ft
Width: 2.5mm/0.10inch
Material: copper

Desoldering Wick advantage:
1. Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.
2. Fast heat conduction, suitable for various electronic PCB circuit boards.
3. The tin suction line is woven with flat needles, soft design, fast heat conduction, suitable for rapid tin suction, improving work efficiency.
4. Woven flat needles.
5. The tin suction line is woven with flat needles, soft design.

Feature:
1. High efficiency and save the electric repairing time.
2. Avoid the high temperature destruction of electric pad.
3. Design in precision,guarantee the max surface tension and the ability of absorbing tin.
4. Speed up the speed of absorbing tin and low residue of flux.
5. Increase the speed of cleaning the PCB pad.
6. Oxidation resistivity and anti-corrosion protection,good thermal conductivity.

Please note:
Quickly removes unwanted solder when used with a soldering iron.
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.

Use:
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.

FOR LEAD-FREE DESOLDERING
Our thin and soft desoldering wire flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks.

ProductSiteLaunchDate : 2024-03-04T07:09:40.550Z
Size : 220V Model
Style : Gun
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 450 degrees_celsius
Wattage : 100 watts