Cart 2 india

Specification
Brand : BEEYUIHF
BulletPoint1 : BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
BulletPoint2 : Solder Remover wire Materials：The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
BulletPoint3 : Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
BulletPoint4 : The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
BulletPoint5 : Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
Color : 1.5mm
ExternallyAssignedProductIdentifier : 7845044350154
ExternallyAssignedProductIdentifier1 : 0741754914990
ExternallyAssignedProductIdentifier2 : 741754914990
FinishType : Finish
HeatingElementType : Ceramic
IncludedComponents : 1 Piece 2.5mm 30M Desoldering Wick
IncludedComponents1 : solder wick
IncludedComponents2 : solder flux
ItemName : BEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
ItemPackageDimensions_Height : 16.2052 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 12.3952 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desoldering-wicks
Manufacturer : BEEYUIHF
Material : lead
ModelName : desoldering wick
ModelNumber : US-RX25300
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : US-RX25300
PowerSourceType : hand_powered
ProductDescription :

BEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98', No-Clean Soldering Wick Wire Roll Remover tool, Desolder wick Braid, Disassemble Electrical Components

Product Specification:
Model: Solder Wick
Length: 30M - 98ft
Width: 2.5mm/0.10inch
Material: copper

Desoldering Wick advantage:
1. Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.
2. Fast heat conduction, suitable for various electronic PCB circuit boards.
3. The tin suction line is woven with flat needles, soft design, fast heat conduction, suitable for rapid tin suction, improving work efficiency.
4. Woven flat needles.
5. The tin suction line is woven with flat needles, soft design.

Feature:
1. High efficiency and save the electric repairing time.
2. Avoid the high temperature destruction of electric pad.
3. Design in precision,guarantee the max surface tension and the ability of absorbing tin.
4. Speed up the speed of absorbing tin and low residue of flux.
5. Increase the speed of cleaning the PCB pad.
6. Oxidation resistivity and anti-corrosion protection,good thermal conductivity.

Please note:
Quickly removes unwanted solder when used with a soldering iron.
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.

Use:
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.

FOR LEAD-FREE DESOLDERING
Our thin and soft desoldering wire flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks.

Different Size for choose:
1 Piece 2.5mm 30M Desoldering Wick

ProductSiteLaunchDate : 2023-12-09T03:33:37.177Z
Size : 220V Model
Style : Gun
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
UpperTemperatureRating : 450 degrees_celsius
Wattage : 100 watts