Cart 2 india

Specification
Brand : Hyuduo
BulletPoint1 : Strong Removal Ability: The braid solder remover sucks solder cleanly and has strong removal ability, ensuring high efficiency, saving time and materials.
BulletPoint2 : Application: The solder sucker tool can be used to clean the pads of BGA components, which can greatly increase the success rate of ball placement.
BulletPoint3 : Prevent Short Circuit: The solder wick is used to absorb and remove excess solder, can suck away the tin stuck on the pins to ensure that there is no short circuit between the pins.
BulletPoint4 : Good Tinning Performance: The no clean desoldering wick has good thermal conductivity and tinning performance.
BulletPoint5 : Oxidation and Resistance: The solder wick is made of pure copper material and special chemical material, which is resistant to oxidation and .
ExternallyAssignedProductIdentifier1 : 0741754914983
ExternallyAssignedProductIdentifier2 : 741754914983
FinishType : Finish
IncludedComponents : inc
ItemName : 5 Pcs Solder Wick, Clean Desoldering Braid Wire, Strong Removal Ability, Solder Sucker Tool, Desoldering Wick, No Clean Solder Wick, for Bag
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desoldering-wicks
Manufacturer : Hyuduo
Material : copper
ModelName : Hyuduofkzertmc1d
ModelNumber : Hyuduofkzertmc1d
NumberOfItems : 1
PartNumber : Hyuduofkzertmc1d
PowerSourceType : PowerSource
ProductDescription : 1. Prevent Short Circuit: The solder wick is used to absorb and remove excess solder, can suck away the tin stuck on the pins to ensure that there is no short circuit between the pins
2. Good Tinning Performance: The no clean desoldering wick has good thermal conductivity and tinning performance
3. Strong Removal Ability: The braid solder remover sucks solder cleanly and has strong removal ability, ensuring high efficiency, saving time and materials
4. Oxidation and Resistance: The solder wick is made of pure copper material and special chemical material, which is resistant to oxidation and
5. Application: The solder sucker tool can be used to clean the pads of BGA components, which can greatly increase the success rate of ball placement

Spec:
Item Type: Solder Wick
Material: Copper
Width: Approx.3mm/0.12in
Length: Approx.1.5m/59.1in
Operating Temperature: Normal soldering temperature
Usage: Suitable for cleaning PCB boards and other solder work

How to Use:
1. For the solder that you want to remove, place an appropriate length of this suction wick on the cleaned reflow point, and then lightly press and heat with the tip of an electric soldering iron, the solder can be absorbed by the suction wick after melting.2. Once absorb the solder, please remove the soldering iron and the suction wick at the same time.3. Please cut off the used wire with scissors.

PackageList:
5 xSolder Wick

Note:
Storage away from light, keep dry and dustproof.

ProductSiteLaunchDate : 2023-06-08T01:54:44.027Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 23271800