Cart 2 india

Specification
Brand : waveshare
BulletPoint1 : Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards; Supports both traditional CAN2.0 and CAN FD protocols, up to 8Mbps data rate
BulletPoint2 : Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
BulletPoint3 : Onboard electrical isolation, up to 5KV isolated voltage, high anti-interference capability, stable operation;Onboard lighting proof, ESD, short circuit protection, more safe communication
BulletPoint4 : Onboard voltage translator, select 3.3V/5V operating voltage by jumper; Onboard 120Ω terminal resistor, configured by jumper
Color : RPI 2-CH CAN FD HAT
CompatibleDevices : Personal Computer, Laptop, Printer, Router, Monitor
ExternallyAssignedProductIdentifier1 : 0710877228727
ExternallyAssignedProductIdentifier2 : 710877228727
HardwareInterface : pci
HardwarePlatform : Raspbian
ItemName : waveshare 2-Channel(2-CH) Isolated CAN FD Expansion HAT for Raspberry Pi with Multi Onboard Protection Circuits Original CAN 2.0 Protocol up to 8Mbps Data Rate
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : desktop-computer-barebones-systems
Manufacturer : Waveshare
ModelNumber : SPXE-14S-R20
OperatingSystem : Linux
PartNumber : RPI CAN HAT
ProductDescription : Overview

This is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with Flexible Data-Rate), up to
8Mbps data rate, features multi onboard protection circuits, high anti-interference capability, and stable operation. It suits for
fields such as automotive devices or industrial automation.


This HAT will enable CAN bus for your RPi, not only the original CAN 2.0 protocol, but also the CAN FD extension, with
up to 8Mbps data rate, and higher data throughput.

Thanks to multi onboard protection circuits, include 500W lighting surge, ESD, short circuit protection, and electrical isolation, it
make the communication more safe and more reliable.


Specifications

CAN controller: MCP2517FD

CAN transceiver: MCP2562FD

Communication interface: SPI (two channels independent SPI by default, swith to one channel SPI by soldering)

Power supply: external power input terminal, or RPi

Power input terminal voltage: DC 8~26V

Operating voltage: 5V

Logic level: 3.3V/5V

Dimensions: 65.0 x 56.5 mm

Package Content

1. 2-CH CAN FD HAT x1
2. 2x20PIN female pinheader x1
3. RPi screws pack (2pcs) x1
ProductSiteLaunchDate : 2019-10-12T07:00:00.000Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43000000