Cart 2 india

Specification
Brand : ELING
BulletPoint1 : Installation Dimension: Approx. Φ52mm/2 inches
BulletPoint2 : Depth Indication Range: Approx. 100m/110yd
BulletPoint3 : Backlight Color: White
BulletPoint4 : Working Voltage: 12VDC
BulletPoint5 : Material: Stainless Steel 316L + Anti-Fog Glass
Color : Black+Black
ExternallyAssignedProductIdentifier : 7616990651769
IncludedComponents : gauge and sensor
ItemName : ELING 2'' Depth Gauge Digital 12V with White Backlight for Vessels Cargo Ships with Transducer
ItemTypeKeyword : depth-gauges
Manufacturer : ELING
Material : Plastic
MeasurementAccuracy : 97%
NumberOfItems : 1
PartNumber : EL1397
ProductDescription :
-Wide Application: 52mm/2 Inch Marine Depth Gauge Suitable for yachts, small and medium sized boats, fishing boats and other marine vehicles.
-Waterproof Design: the dial is IP67, and the back cover is IP65
-Installation: easy to install, good durability and anti-vibration, equipped with alarm performance, flexible and simple operation.
-Item Type: Depth Gauge
-Material: Stainless Steel 316L + Anti-Fog Glass

Product Features:
-Item Type: Depth Gauge
-Material: Stainless Steel 316L + Anti-Fog Glass
-Installation Diameter: Approx. Φ52mm/2 inches
-Depth Indication Range: Approx. 100m/110yd
-Backlight Color: White
-Working Voltage: 12VDC
-Working Current: ≤60mA
-Working Temperature: -30℃ to +75℃
-Storage Temperature: -40℃ to +85℃
-Protection Grade: IP67, the back cover is IP65

Operation:
A. This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power.
B. Keypad Mode: Quick press the keypad Mode to switch SH/DP/KL/ UN. Hold on the keypad Mode to turn on/off the monitor. Shortly press the keypad “▲“▼to set the value required. Hold on the keypad “▲”“▼ to keep the digital increasing/decreasing fluently.
Parameter:
-SH: (Low level alarm)
-Range : 0-0.6-19.9, when the level no more than value(SH) appointed, the symbol flickering and the buzzer beeps all the time.
-If SH=0--> No alarm, alarm setting range is 0.6-19.9
DP (Depth Alarm) Range:
1. Unit “M”: 0-99
2. Unit “FT: 0-199
3. Unit “F”: 0-49
-If the level exceed the a pointed value , the buzzer will beeps twice
KL(Keel offset) Range:
1. Unit “M”: 0-6.0
2. Unit“FT: 0-19.9
3. Unit“F”: 0-3.3
-If the value(KL) was appointed, the depth indicated should be deducted by this .That is to say :
Indication =Actual depth -appointed value
UN: Switch the unit M(meet)- FT(feet) – F(Fathom)
Remark:
1. The digital will be flickering where there is not signal or the signal is too weak to read .
2. Indication range: 3 ft~199ft , if the depth > 19.9, the digital will be like “XXX”, if less the digital will be like “XX.X”

Package List:
1 x Depth Gauge
1 x Transducer (with Wire)
1 x Installation Instruction
ProductSiteLaunchDate : 2024-04-12T05:50:18.380Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1