Cart 2 india

Specification
Brand : Bitodd
BulletPoint : CAMWAY Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool 32 Blades
BulletPoint1 : Transparent Scales: The scales on this ruler are chemically etched so that each scale is recessed. This makes the scales more legible. You can see it more accurately when you use it
BulletPoint2 : Dual Scale: This ruler has two unit scales, g/cm³ and lb/gal. you can easily convert between the two different units
BulletPoint3 : Accurate Measurement: The minimum measurement range of this ruler is 0.01 g/cm³ and 0.1 lb/gal. This makes the measurement of liquids precise enough
BulletPoint4 : High Quality Materials: The measuring rod and the surface of the hydrometer are made of hard aluminum alloy and stainless steel respectively, which have good wear resistance
BulletPoint5 : Customer Service: We insist on the highest standards for all our products, if you encounter any problems, please contact us in time, we will deal with it within 24 hours
Color : 0.001mm
ExternallyAssignedProductIdentifier : 7649930554615
IncludedComponents : 1* Mud Hydrometer 1* Toolbox 1* English Manual
ItemName : Bitodd Mud Specific Gravity Meter, Engineering Plastic Mud Specific Gravity Meter, Mud Specific Gravity Balance Specific Gravity Meter, Mud Scale for Road Construction Site, Bridge
ItemPackageDimensions_Height : 3.94 inches
ItemPackageDimensions_Length : 21.65 inches
ItemPackageDimensions_Width : 6.69 inches
ItemPackageQuantity : 1
ItemTypeKeyword : depth-gauges
Manufacturer : Bitodd
Material : Steel
MeasurementAccuracy : 0.01 g/cm³
ModelNumber : CF#261
NumberOfItems : 1
PartNumber : CF#261
ProductDescription :

Detailed 

Durable Sample Cup: The sample cup of this product is made of engineering plastic, which ensures accurate measurements during long-term use.

Leveling Capsule: This product has a leveling bubble on the top of the scale. You can check whether the scale is leveled through the green bubble.

Toolbox: The product comes with a toolbox to keep your tools organized. It is easy to store and carry.

Specification

Sample cup material: engineering plastic engineering plastic

Rod material: Aluminum alloy Aluminum alloy

Scale material Stainless steel

Units: g/cc, lb/gal

Gross Weight: 1.65 kg/3.64 lbs.

Net weight: 1.5kg/3.31lbs

Package size: 55*17*10 cm/21.65*6.69*3.94 inches

Product size: 50*14*10 cm/19.68*5.51*3.94 inches

Usage

1. Fill the sample cup with slurry, level the mouth of the cup and do not leave air bubbles.

2. Gently close the lid of the cup and wipe off the excess mud.

3. Move the weights slowly. The lever indicates level when the horizontal vesicle is in the center.

4. Read the scale shown on the left side of the weight, i.e. the specific gravity of the mud.

5. The instrument should be rinsed and wiped clean after use.

Package Includes

1* Mud Specific Gravity Meter

1* Tool box

1* English manual

Precautions

1. Check whether the instrument is accurate. You can fill the sample cup with distilled water and measure the specific gravity in the same way. If the measured specific gravity is 1, the hydrometer is accurate.

2. Please allow for slight color difference caused by shooting light and 1-3 cm error caused by manual measurement, and make sure you don't mind before ordering.

ProductSiteLaunchDate : 2024-08-14T06:18:38.413Z
Size : 12.7mm small base
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41112401