Cart 2 india

Specification
Brand : SDent
BulletPoint1 : Input Power Source: AC220-240V 50/60Hz; AC100-120V 50/60H
BulletPoint2 : AMP: 100W
BulletPoint3 : Fuse: 2A
BulletPoint4 : Weight: 0.55kgs
BulletPoint5 : Power: 500W
BulletPoint6 : Rotational Speed: 2800 rpm
BulletPoint7 : Its spherical machine part can work at 0-45° degree incline
Color : As Photo Shows.
ExternallyAssignedProductIdentifier : 4779104359081
FdaDeviceClassification : i
FdaIndicationOfUse : otc
FdaInstructionsForUseType : consumer
FdaLabelType : consumer
FdaPremarketApprovalNumber510k : k123441
FdaPremarketApprovalNumberPma : p123441
IncludedComponents : 100PCS in different color
ItemName : S&Dent 1 Unit Dental lab Wax Knife Heater
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : professional-dental-denture-materials
Manufacturer : S&Dent
ModelNumber : JT-29B
NumberOfItems : 50
PartNumber : JT-29B
ProductDescription : S&Dent 1 Unit Dental lab Wax Knife Heater. Environment for Use: Indoor use. Temperature: 5C 40C. Moisture: 50% 80%. Tolerance of Voltage: 土10% of designated voltage. Pollution Grade: 2. Specifications: Input Power Source: AC220-240V 50/60Hz; AC100-120V 50/60Hz. AMP: 100W. Fuse: 2A. Dimension: 92*270*95mm. Weight: 0.55kgs. Description： It is a tool to apply high heat to the carving knife instantaneously in safe and convenient manner. Rather than the type that the carving knife is heated by the fire tools such as Bunsen burner, alcohol lamp, and gas burner etc. at time of waxing up works. High heat can be applied to the carving knife instantaneously. It is safe against burns and fires. Energy can be used efficiently due to the operation by a sensor. lt is ergonomically designed for the convenient use. lt can be cleanly used and there is a replaceable cap. In case carving knife is inserted for a long time, error sign is operated to protect the circuit safe for the safety of the product and its user. How to use: 1) Plug in the power cord and turn on the switch. 2) Hold the wax knife and place the wax knife in the center position of the sensor. The handle is close to the optical sensor and it will be removed from the wax knife for 2-3 seconds. 3) The wax knife gets hot, the machine works normally, and the operator can carry on the follow-up work. 4) If there is no heat in the wax cutter, contact the supplier to solve the problem. Caution in use: 1) Do not touch the product with wet hands. 2) Precise circuit is built in this product. Excessive power or shock to the product can cause a failure. 3) If there is a question or defect found during the use of a product do not directly disassemble it, and inquire to the place of purchase. 4) For better performance, avoid the sensor from interfering by infrared (ie. Solar or heat lamp etc. if possible. 5) Be careful not to place the carving handle stained with melted wax teach the optical sensor. (This can deteriorate the sensitivity of the optical sensor). 6) Do not use damaged power cord or plug, loose outlet (There is a danger of electric shock fire). 7) Do not bend the power cord excessively or be squashed by a heavy object. (There is a danger of electric shock, fire). 8) Plug must be connected to the outlet that has an earth terminal (There is danger of electric shock, fire). 9) Do not block the ventilator located at the bottom of the product (it can overheat, fire). 10) Unplug the cord when it lightens and thunders, and when it is not used fora long time. (There is a danger of electric shock, fire). 11) Do not pull out the cord area or touch the power plug with wet hands. (There is a danger of electric shock, fire). 12) Do not install on the place where there is much Moisture or dust, and the place where water splashes. (There is a danger of electric shock, fire). 13) Do not install on the place near the electric heating appliance. (There is a danger of fire). 14) Unplug the power cord, and do not directly spray water or wipe it with chemicals etc. (There is a danger of electric shock, fire). 15) Wipe the dust, water etc. Well off the power plug pin and contact area. (There is danger of electric shock, fire). 16) If there is a strange sound, smell, smoke found from the product, unplug the power cord immediately. (There is danger of electric shock, fire). 17) Do not disassemble, repair , remodel, carelessly. (There is danger of electric shock). Manufacturer will never be responsible for any problems occurred by the misuse of the product in a manner other than prescribed ones.
ProductSiteLaunchDate : 2015-08-10T07:00:00.000Z
Size : 44×35×35cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureRating : Ambient: 15 to 25 C (59 to 77 F)
UnitCount : 1
UnspscCode : 53130000