Specification Brand : uxcell BulletPoint1 : U624ZZ (I.D.=4mm, O.D.=13mm, Thickness=7mm) BulletPoint2 : U624ZZ bearings are shielded on both sides to keep lubricant in BulletPoint3 : Carbon Steel long-life bearings, smooth and low noise BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use BulletPoint5 : Dynamic load rating of 1106 newtons and Static load rating of 390 newtons ExternallyAssignedProductIdentifier1 : 755368211529 ExternallyAssignedProductIdentifier2 : 0755368211529 IncludedComponents : NO ItemName : uxcell U624ZZ Deep Groove Guide Pulley Rail Ball Bearings 4mmx13mmx7mm Double Metal Shielded Carbon Steel Bearings 20pcs ItemPackageDimensions_Height : 9.398 centimeters ItemPackageDimensions_Length : 1.27 centimeters ItemPackageDimensions_Width : 4.0386 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Metal,Steel ModelNumber : a19101600ux0197 NumberOfItems : 1 PartNumber : a19101600ux0197 ProductDescription : Note: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Carbon Steel made with heat treating, provides high and uniform hardness, good wear resistance Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.