Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : U608ZZ (I.D.=8mm, O.D.=30mm, Thickness=10mm)
BulletPoint2 : U608ZZ bearings are shielded on both sides to keep lubricant in
BulletPoint3 : Chrome Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Number of Pack: 5Pcs
ItemName : uxcell U608ZZ 608 Nylon U Groove Bearings 8x30x10mm Double Metal Shielded (GCr15) Chrome Steel Ball Bearings 5pcs
ItemPackageDimensions_Height : 13.9 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Metal,Steel
ModelNumber : a19111200ux0252
NumberOfItems : 1
PartNumber : a19111200ux0252
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 627ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 7mm
Outer Diameter (D): 22mm
Thickness (B): 7mm
Dynamic Load Rating (Cr): 3.3kN
Static Load Rating (Cor): 1.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 2 Pcs

ProductSiteLaunchDate : 2020-09-29T01:02:36.143Z
Size : 8x30x10mm
SpecificationMet : Ul
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31171500