Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : SMR95ZZ (I.D.=5mm, O.D.=9mm, Thickness=3mm)
BulletPoint2 : smr95z bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Stainless steel races for durability and corrosion resistance
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 169 newtons and dynamic load rating of 431 newtons
ItemName : uxcell SMR95ZZ Stainless Steel Ball Bearing 5x9x3mm Shielded MR95ZZ Bearings 2pcs
ItemPackageDimensions_Height : 16.51 centimeters
ItemPackageDimensions_Length : 0.381 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Stainless Steel
ModelNumber : a19040300ux0188
NumberOfItems : 2
PartNumber : a19040300ux0188
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Stainless steel bearing features stronger rust and corrosion resistance ability to withstand destruction caused by humidity and some other media.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model:SMR95ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Material: 440C Stainless Steel (9Cr18)
Cage Material: 304 Stainless Steel (0Cr18Ni9)
Inner Diameter (d): 5mm
Outer Diameter (D): 9mm
Thickness (B): 3mm
Dynamic Load Rating (Cr): 0.431kN
Static Load Rating (Cor): 0.169kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 2 Pcs

ProductSiteLaunchDate : 2019-06-03T12:00:44.018Z
Size : 5x9x3mm
SupplierDeclaredDgHzRegulation : not_applicable