Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Model=SMR85ZZ (I.D.=5mm, O.D.=8mm, Thickness=2.5mm)
BulletPoint2 : Bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made of 440C Stainless Steel, features with stronger rust and corrosion resistance ability
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 64.8N and dynamic load rating of 166.5N; Limiting Speed (Oil): 56700rpm
ExternallyAssignedProductIdentifier1 : 841339012582
ExternallyAssignedProductIdentifier2 : 0841339012582
ItemDisplayDimensions_Length : 15 millimeters
ItemDisplayWeight : 30 grams
ItemName : uxcell SMR85ZZ Deep Groove Ball Bearings 5mm x 8mm x 2.5mm Double Shielded Stainless Steel 10pcs
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.1 centimeters
ItemPackageDimensions_Width : 8.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Stainless Steel
ModelNumber : a19112700ux0163
NumberOfItems : 4
PartNumber : a19112700ux0163
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: SMR85ZZ
Seal Type: Double Shielded
Inner Race/Outer Race Material: 440C Stainless Steel (9Cr18)
Cage Material: 304 Stainless Steel (0Cr18Ni9)
Inner Diameter (d): 5mm
Outer Diameter (D): 8mm
Thickness (B): 2.5mm
Dynamic Load Rating (Cr): 166.5N
Static Load Rating (Cor): 64.8N
Limiting Speed (Oil): 56700rpm
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 10 pcs
ProductSiteLaunchDate : 2021-09-02T07:23:29.363Z
Size : 5x8x2.5mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4
UnspscCode : 31171500