Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : SG15 (I.D.=5mm, O.D.=17mm, Thickness=8mm)
BulletPoint2 : SG15 bearings are Sealed on both sides to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Number of Pack: 5Pcs
Color : Silver
ExternallyAssignedProductIdentifier1 : 726367037656
ExternallyAssignedProductIdentifier2 : 0726367037656
IncludedComponents : Deep Groove Ball Bearings
ItemName : uxcell SG15 Deep U Groove Ball Track Guide Bearing 5mmx17mmx8mm Double Sealed (GCr15) Chrome Steel Bearings 5pcs
ItemPackageDimensions_Height : 8.9 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
Material1 : Stainless Steel
Material2 : Rubber
ModelNumber : a19101600ux0190
NumberOfItems : 1
PackageLevel : unit
PartNumber : a19101600ux0190
ProductDescription : Note：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Double-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: SG15
Shielded Type: Double Sealed
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 5mm
Outer Diameter (D): 17mm
Thickness (B): 8mm
Groove width: 5mm
Groove depth: 1.35mm
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 5Pcs

ProductSiteLaunchDate : 2019-12-13T08:00:48.521Z
Size : MF74ZZ (4Qty)
SpecificationMet : P0 (Abec1)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 10