Cart 2 india

Specification
Brand : uxcell
BulletPoint : Bearings
BulletPoint1 : Model=S6200-2RS, Inner Dia.=10mm, Outer Dia.=30mm, Thickness=9mm
BulletPoint2 : Bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made of 440C Stainless Steel, features with stronger rust and corrosion resistance ability
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 2160N and dynamic load rating of 4590N; Limiting Speed (Oil): 26100rpm
Color : One Color
ExternallyAssignedProductIdentifier : 9187866891704
ExternallyAssignedProductIdentifier1 : 4547359346572
ExternallyAssignedProductIdentifier2 : 04547359346572
ItemName : uxcell S6200-2RS Deep Groove Ball Bearings 10mm x 30mm x 9mm Double Sealed 440C Stainless Steel 2pcs
ItemPackageDimensions_Height : 12.8 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Stainless Steel
ModelNumber : a19112700ux0192
NumberOfItems : 1
PartNumber : a19112700ux0192
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: S6200-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: 440C Stainless Steel (9Cr18)
Cage Material: 304 Stainless Steel (0Cr18Ni9)
Inner Diameter (d): 10mm
Outer Diameter (D): 30mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 4590N
Static Load Rating (Cor): 2160N
Limiting Speed (Oil): 26100rpm
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 2 pcs
ProductSiteLaunchDate : 2021-09-02T07:23:17.832Z
Size : 10x30x9mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1