Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : R4ZZ (I.D.=1/4", O.D.=5/8", Thickness=0.196")
BulletPoint2 : r4-2z bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 615 newtons and dynamic load rating of 1480 newtons
Color : Silver
Edition : 91
ExternallyAssignedProductIdentifier : 5052127036740
ExternallyAssignedProductIdentifier1 : 650209434016
ExternallyAssignedProductIdentifier2 : 650209434023
ExternallyAssignedProductIdentifier3 : 0650209434016
ExternallyAssignedProductIdentifier4 : 0650209434023
IncludedComponents : ARRMA Ball Bearing 8x16x5mm (2RS) (2), ARA610037
ItemDisplayWeight : 63 pounds
ItemName : uxcell R4ZZ Deep Groove Ball Bearing 1/4-inchx5/8-inchx0.196-inch Shielded Z2 Lever Bearings 20pcs
ItemPackageDimensions_Height : 13.716 centimeters
ItemPackageDimensions_Length : 1.016 centimeters
ItemPackageDimensions_Width : 8.128 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Alloy Steel
ModelNumber : a19091100ux0554
NumberOfItems : 1
PackageLevel : unit
PartNumber : a19091100ux0554
ProductDescription : Description:
Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Notice:
Keep clean to prevent dust from entering the bearing.
Do not make strong impact on the bearing during use.
Use proper tools for mounting.
Hot mounting is recommended for machinery and equipment with high precision requirements.
When operating the bearings, pay attention to wear gloves to prevent the bearings from corrosion and rusting.

Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
Specification:

Model: R4ZZ

Shield Type: Double Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15)

Cage Material: Stamping Steel

Inner Diameter: 1/4"

Outer Diameter: 5/8"

Thickness: 0.196" / 4.978mm

Dynamic Load Rating (Cr): 1.48kN

Static Load Rating (Cor): 0.615kN

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 20 Pcs



ProductSiteLaunchDate : 2019-12-03T04:00:46.123Z
Size : 1/4"x5/8"x0.196"
StreetDate : 2020-10-07T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable