Cart 2 india

Specification
AgeRangeDescription : Kid
Brand : uxcell
BulletPoint1 : R3-2RS (I.D.=3/16", O.D.=1/2", Thickness=0.196")
BulletPoint2 : r3-2rs bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 490 newtons and dynamic load rating of 1310 newtons
ExternallyAssignedProductIdentifier : 6440891420312
ExternallyAssignedProductIdentifier1 : 747333553031
ExternallyAssignedProductIdentifier2 : 0747333553031
ItemDisplayWeight : 0.03 pounds
ItemName : uxcell R3-2RS Deep Groove Ball Bearing 3/16-inchx1/2-inchx0.196-inch Sealed Z2 Lever Bearings 5pcs
ItemPackageDimensions_Height : 13.1064 centimeters
ItemPackageDimensions_Length : 2.3876 centimeters
ItemPackageDimensions_Width : 9.1948 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
ManufacturerMinimumAge : 156
Material : Steel
ModelNumber : a19091100ux0510
NumberOfItems : 1
OperationMode : Manual
PartNumber : a19091100ux0510
PowerSourceType : manual
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:
-Single-row, pre-lubricated, normal accuracy.
-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
-Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: R3-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3/16" / 4.763mm
Outer Diameter (D): 1/2" / 12.7mm
Thickness (B): 0.196" / 4.978mm
Dynamic Load Rating (Cr): 1.31kN
Static Load Rating (Cor): 0.49kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-12-03T04:00:45.418Z
Size : 3/16"x1/2"x10/51"
SpecificationMet : ABEC 7
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : unisex-child
TargetGender : unisex