Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : MR63ZZ (I.D.=3mm, O.D.=6mm, Thickness=2.5mm)
BulletPoint2 : mr63zz bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 74 newtons and dynamic load rating of 209 newtons
ItemName : uxcell MR63ZZ Ball Bearing 3x6x2.5mm Double Shielded Mini Deep Groove Bearings 5pcs
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 0.0762 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19070900ux0811
NumberOfItems : 1
PartNumber : a19070900ux0811
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:
-Single-row, pre-lubricated, normal accuracy.
-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
-Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: MR63ZZ
Shielded Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3mm
Outer Diameter (D): 6mm
Thickness (B): 2.5mm
Dynamic Load Rating (Cr): 0.209kN
Static Load Rating (Cor): 0.074kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-09-17T03:30:32.563Z
Size : 3x6x2.5mm
SupplierDeclaredDgHzRegulation : not_applicable