Specification Brand : uxcell BulletPoint : Marathon Ball Bearings BulletPoint1 : MR105-2RS (I.D.=5mm, O.D.=10mm, Thickness=4mm) BulletPoint2 : mr105-2rs bearings are sealed on BOTH SIDES to keep lubricant in BulletPoint3 : Made from Chrome Steel (GCr15), durability and resistance to under heavy loads BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use BulletPoint5 : Static load rating of 135 newtons and dynamic load rating of 366 newtons Color : No Color ExternallyAssignedProductIdentifier : 6440891423719 ExternallyAssignedProductIdentifier1 : 813117600205 ExternallyAssignedProductIdentifier2 : 0813117600205 IncludedComponents : Marathon 60020 1/2" Standard Ball Bearings, 2/Pk ItemDisplayWeight : 0.16 pounds ItemName : uxcell MR105-2RS Deep Groove Ball Bearings 5mm Inner Dia 10mm OD 4mm Bore Double Sealed Chrome Steel Z2 4pcs ItemPackageDimensions_Height : 14.3 centimeters ItemPackageDimensions_Length : 0.6 centimeters ItemPackageDimensions_Width : 9.8 centimeters ItemPackageQuantity : 4 ItemTypeKeyword : deep-groove-ball-bearings Manufacturer : uxcell Material : Steel ModelNumber : a19092000ux1259 NumberOfItems : 4 PackageLevel : unit PartNumber : a19092000ux1259 ProductDescription : NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:
Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.