Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : MR104ZZ (I.D.=4mm, O.D.=10mm, Thickness=4mm)
BulletPoint2 : mr104zz bearings are Shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 218 newtons and dynamic load rating of 604 newtons
Color : Black
ExternallyAssignedProductIdentifier1 : 611138943901
ExternallyAssignedProductIdentifier2 : 0611138943901
IncludedComponents : Deep Groove Bearings
ItemName : uxcell MR104ZZ Deep Groove Ball Bearings 4mm Inner Dia 10mm OD 4mm Bore Double Shielded Chrome Steel Z2 20pcs
ItemPackageDimensions_Height : 10.414 centimeters
ItemPackageDimensions_Length : 0.762 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 20
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19092000ux1230
NumberOfItems : 20
PackageLevel : unit
PartNumber : a19092000ux1230
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: MR104ZZ
Seal Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 4mm
Outer Diameter (D): 10mm
Thickness (B): 4mm
Dynamic Load Rating (Cr): 604N
Static Load Rating (Cor): 218N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 20 Pcs

ProductSiteLaunchDate : 2019-12-13T08:00:35.653Z
Size : 6201-2RS (12*32*10)
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable