Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 6907-2RS (I.D.=35mm, O.D.=55mm, Thickness=10mm)
BulletPoint2 : 6907 2RS bearings are sealed on BOTH SIDES to keep lubricant in
BulletPoint3 : Made from Carbon Steel, durability and resistance to under heavy loads
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Static load rating of 7750 newtons and dynamic load rating of 10900 newtons
ExternallyAssignedProductIdentifier1 : 810135400015
ExternallyAssignedProductIdentifier2 : 0810135400015
IncludedComponents : 6006-2RS
ItemName : uxcell 6907-2RS Deep Groove Ball Bearings Z2 35mm X 55mm X 10mm Double Shielded Carbon Steel 5pcs
ItemPackageDimensions_Height : 17.9 centimeters
ItemPackageDimensions_Length : 6.5 centimeters
ItemPackageDimensions_Width : 8.6 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19090200ux0007
NumberOfItems : 5
PackageLevel : unit
PartNumber : a19090200ux0007
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 6907-2RS
Seal Type: Double Sealed
Inner Race/Outer Race Material: Carbon Steel
Cage Material: Stamping Steel
Inner Diameter (d): 35mm
Outer Diameter (D): 55mm
Thickness (B): 10mm
Dynamic Load Rating (Cr): 10900N
Static Load Rating (Cor): 7750N
Accuracy Class: P0 (ABEC-1)
Noise Level: Z2
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2019-11-15T09:30:30.863Z
Size : 35mmx55mmx10mm
SpecificationMet : ISO 9001
Style : 6006-2RS
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 200
UnspscCode : 31171500